 | UCS B480 M5
Network Server IBM | 03 Nov 2020
149879 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for x86 Service Pack 2 for SUSE® SLES 11 |
Product Description
Cisco UCS B480 M5 with Intel Xeon 8260L CPU
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 73-17832-03 |
| BIOS/uEFI: | UEFI: B480M5.4.1.2a.0.0624200115 (06/24/2020) |
| CPU: | 4 Intel Xeon® Platinum 8260L Processor 2.40 GHz |
| RAM: | 3840 GB |
| Ports and Bus Types: | PCI Express X8 PCI Express X16 |
| Video Adapter: | Matrox Graphics Inc. G200 SE A (PCI) |
| Host Bus Adapter: | LSI Logic MegaRAID SAS-3 3108 , Serial SCSI (SAS) |
| Hard Disk Drive: | Seagate®
ST9500620SS 500GB 7.2K RPM 6Gbps SAS 2.5
, Serial SCSI (SAS) Toshiba Enterprise Performance HDD, 300GB, SAS (AL14SXB30ENY) , Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.5.0-29.1 |
Config Notes
|
Adapters and Drivers
| Matrox Graphics Inc. G200 SE A (PCI) | |||||||||
| Driver Type: Video Driver | Driver Name: mgag200.ko | ||||||||
| Driver Date: 08-Nov-2019 | Driver Size: 103832 | ||||||||
| Checksum: 0a84338d028c855ca7c2eae94404eae4 | |||||||||
|
|
|||||||||
| Cisco UCS VIC 1440 | |||||||||
| Driver Type: | Driver Name: enic.ko | ||||||||
| Driver Date: 09-Nov-2019 | Driver Size: 201832 | ||||||||
| Driver Version: 07.707.51.00 | |||||||||
|
|
|||||||||
| LSI Logic MegaRAID SAS-3 3108 | |||||||||
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko | ||||||||
| Driver Date: 09-Nov-2019 | Driver Size: 309256 | ||||||||
| Checksum: a649376d8c32760e3d73ee1c44058ef7 | |||||||||
| Driver Version: 07.707.51.00-rc1 | |||||||||
|
|
|||||||||
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com