|
 | UCS B420 M3
Network Server
IBM | 02 Nov 2020
149874 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with XEN Service Pack 1 for SUSE® SLES 11 |
Product Description
Cisco UCS B420 M3
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 73-14172-05 |
| BIOS/uEFI: | UEFI: B420M3.2.2.6i.0.110720191420 (11/07/2019) |
| CPU: | 4 Intel
Xeon® Processor E5-4657L v2 2.40 GHz |
| RAM: | 128 GB |
| Ports and Bus Types: | 3 PCI Express X16 |
| Video Adapter: | Matrox Graphics Inc.
G200 SE A (PCI) |
| Host Bus Adapter: | LSI Logic
MegaRAID SAS 2208
, Serial SCSI (SAS) |
| Hard Disk Drive: | Western Digital
WD3001BKHG Xe SAS hard drives
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.5.0-29.1 |
Config Notes
- Install: PXE Boot, OS Installed via Network.
|
Adapters and Drivers
| | | | | |
| Matrox Graphics Inc.
G200 SE A (PCI) |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 08-Nov-2019 | Driver Size: 103832 |
| | Checksum: 0a84338d028c855ca7c2eae94404eae4 |
|
| Cisco
UCS VIC 1280 (NIC) |
| | Driver Type: | Driver Name: enic.ko |
| | Driver Date: 09-Nov-2019 | Driver Size: 201832 |
| |
| | Driver Version: 07.707.51.00 |
|
| LSI Logic
MegaRAID SAS 2208 |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 09-Nov-2019 | Driver Size: 309256 |
| | Checksum: a649376d8c32760e3d73ee1c44058ef7 |
| | Driver Version: 07.707.51.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|