|
 | K1 Power E950
Network Server
IBM | 20 Oct 2020
149850 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for x86 Service Pack 3 for SUSE® SLES 11 |
Product Description
For more information, please check the address https://www.inspurpower.com
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | 00L5203 |
| BIOS/uEFI: | 940.10 |
| CPU: | 4 IBM
POWER9 3.4 GHz |
| RAM: | 240 GB |
| Ports and Bus Types: | 4 USB Ports 8 PCI Express X16 3 PCI Express X8 |
| Host Bus Adapter: | IBM
PCIe3 x8 SAS RAID Adapter Quad-port 6Gb (57B4)
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 IBM
600GB 10K SAS 2.5-inch 6Gbps SFF HS HDD
, Serial SCSI (SAS) Samsung®
PM985 2.5 NVMe PCIe SSD, 800GB (MZQLB800HAJR)
, NVMe |
| Test Kit: | System Certification Kit 8.5.0-29.1 |
Config Notes
- Hard Disk Configuration: RAID 5.
- Install: PXE Boot, OS Installed via network.
- System firmware setting: the "reboot system on NMI" setting was disabled in the IMM configuration, and kdump memory was increased from 128 to 256 MB, for kdump to function on system.
|
Referenced Bulletins
139804
Adapters and Drivers
| | | | | |
| 4 Broadcom®
NetXtreme II BCM57800 1/10 Gigabit Ethernet |
| | Driver Type: LAN Driver | Driver Name: bnx2x.ko |
| | Driver Date: 15-May-2019 | Driver Size: 1502816 |
| | Checksum: fc9a050008250d275cdef5a0ef3896bc |
| | Driver Version: 1.712.30-0 |
|
| IBM
PCIe3 x8 SAS RAID Adapter Quad-port 6Gb (57B4) |
| | Driver Type: HBA Driver | Driver Name: ipr.ko |
| | Driver Date: 14-May-2019 | Driver Size: 268664 |
| | Checksum: 120d1cacfe9404ae21d73a29fd6a70a5 |
| | Driver Version: 2.6.4 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|