|
 | H3C UniServer R4950 G5
Network Server
IBM | 17 Oct 2020
149843 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 with XEN Service Pack 4 for SUSE® SLES 10 |
Product Description
H3C UniServer R4950 G5
Tested Configuration:
Computer Type: | Rack Mount |
Mother Board Revision: | 0231A111 |
BIOS/uEFI: | UEFI: 5.03.00 (08/18/2020) |
CPU: | 2 AMD
EPYC™ 7702 2.00 GHz |
RAM: | 512 GB |
Ports and Bus Types: | 6 PCI Express X8 2 PCI Express X16 6 USB Ports |
Video Adapter: | ASPEED
AST2500 |
Host Bus Adapter: | LSI Logic
SAS 9300-8i
, Serial SCSI (SAS) |
Hard Disk Drive: | Intel
SSD D3-S4610 Series 240GB SATA (SSDSC2KG240G8)
, Serial SCSI (SAS) |
Test Kit: | System Certification Kit 8.5.0-29.1 |
Config Notes
- This bulletin was released to change the vendor to SGI. Please note that for full support on the listed OS release a special support contract is necessary. The system is fully supported on the most current service pack release.
|
Referenced Bulletins
95209
Adapters and Drivers
| | | | | |
ASPEED
AST2500 |
| Driver Type: Video Driver | Driver Name: ast.ko |
| Driver Date: 06-Jun-2020 | Driver Size: 115632 |
| Checksum: f1fc1a718c1def157bd5b84ad0d9dbae |
|
2 Intel
Ethernet Controller I350-BT2 (Dual Port) |
| Driver Type: LAN Driver | Driver Name: igb.ko |
| Driver Date: 06-Jun-2020 | Driver Size: 496728 |
| Checksum: bbf398d0be838fc838a89ffa888d4513 |
| Driver Version: 5.6.0-k |
|
LSI Logic
SAS 9300-8i |
| Driver Type: HBA Driver | Driver Name: mpt3sas.ko |
| Driver Date: 07-Jun-2020 | Driver Size: 566432 |
| Checksum: 87b75796d040da650a7201ccaffad9ee |
| Driver Version: 33.100.00.00 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|