|
| PowerEdge MX840c
Network Server
Unisys Corporation | 09 Sep 2020
149747 |
SUSE YES Certified for the following products:
Product Description
Please visit www.dell.com for more information. These certifications are performed for Dell EMC solutions. For any queries, Please contact Dell EMC.
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | A02 |
| BIOS/uEFI: | UEFI: 2.8.1 (06/29/2020) |
| CPU: | 4 Intel
Xeon® Platinum 8280L Processor 2.70 GHz |
| RAM: | 1 TB |
| Ports and Bus Types: | 2 USB Ports
7 PCI Express X16
3 PCI Express X8 |
| Video Adapter: | Matrox®
MGA G200eW |
| Host Bus Adapter: | Dell
PERC H730P MX
, Serial SCSI (SAS) |
| Hard Disk Drive: | Seagate®
ST600MM0088 (600GB)
, Serial SCSI (SAS)
Dell
Express Flash NVMe, 6.4 TB, 2.5
, NVMe |
| Test Kit: | System Certification Kit 8.5.0-29.1 |
Config Notes
- Install: The SLES install was performed using a virtual DVD device.
- The i40e.ko used during testing is not SUSE SolidDriver Program compliant. The driver was installed from the following driver package: i40e.ko-2.0.19.tar.gz. This driver package can be downloaded and installed after the SLES install. To obtain the driver go to: https://sourceforge.net/projects/e1000/files/i40e%20stable/2.0.19/
|
Adapters and Drivers
| | | | | |
| Matrox®
MGA G200eW |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 08-Nov-2019 | Driver Size: 103832 |
| | Checksum: 0a84338d028c855ca7c2eae94404eae4 |
|
|
| 2 Intel
Ethernet Network Adapter XXV710-DA2 (Dual-Port) |
| | Driver Type: LAN Driver | Driver Name: i40e.ko |
| | Driver Date: 09-Nov-2019 | Driver Size: 785376 |
| |
| | Driver Version: 2.8.20-k |
|
| Dell
PERC H730P MX |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 09-Nov-2019 | Driver Size: 309256 |
| |
| | Driver Version: 07.707.51.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Unisys Corporation
801 Lakeview Drive
St2 100
Blue Bell
, PA
192422
Toll Free: 8008748647
Website: http://www.unisys.com
|