K1 power E980

K1 power E980
Network Server
IBM

04 Sep 2020
149741

SUSE YES Certified for the following products:
Operating Systems:

SUSE® Linux Enterprise Server 11 for x86 Service Pack 3 for SUSE® SLES 11

Product Description
For more information, please check the address https://www.inspurpower.com

Tested Configuration:

Computer Type:	Rack Mount
Mother Board Revision:	00VK809
BIOS/uEFI:	940.10
CPU:	8 IBM POWER9 3.15 GHz
RAM:	1964 GB
Ports and Bus Types:	5 USB Ports 16 PCI Express X16
Hard Disk Drive:	3 Samsung® PM985 2.5 NVMe PCIe SSD, 800GB (MZQLB800HAJR) , NVMe
Test Kit:	System Certification Kit 8.4.0-41.2

Config Notes

Install: The SLES install was performed using a virtual DVD device.
SLES update: SLES 12 SP5 kernel update "kernel-default-4.12.14-122.17.1" or later is required and was installed during certification testing. This kernel update contains a fix to the i40e.ko driver to fix an issue where the two RJ45 ports are not detected, only the two SFP+ ports are detected on the Intel Ethernet Controller X710-TM4 adapter. After the system has been registered with SCC you can install the update with the following command: zypper install kernel-default-4.12.14-122.17.1

Referenced Bulletins
150683

Adapters and Drivers


4 Broadcom® NetXtreme II BCM57800 1/10 Gigabit Ethernet
	Driver Type: LAN Driver	Driver Name: bnx2x.ko
	Driver Date: 09-Nov-2019	Driver Size: 1481952
	Checksum: 518deb57b73a6fab64abe5ec0d11d028
	Driver Version: 1.713.36-0

The term SUSE YES Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.

https://www.suse.com/product-certification/yes-certified/certification-requirements/

For more information regarding the specific test configuration, please contact:

IBM
For support regarding this specific configuration, please visit:
www.ibm.com

606747

K1 power E980 - Yes Bulletin 149741 | SUSE