|
 | ThinkSystem SN850 (7X15, Xeon SP Gen 1)
Network Server
Fujitsu | 11 Aug 2020
149564 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 Service Pack 1 for SUSE® SLES 11 |
Product Description
For more information about this system, please visit www.lenovo.com.
Tested Configuration:
Computer Type: | Compute Module |
Mother Board Revision: | PASS 5 |
BIOS/uEFI: | UEFI: IVE151L - v2.51 (01/14/2020) |
CPU: | 4 Intel
Xeon® Platinum 8176 Processor 2.10 GHz |
RAM: | 512 GB |
Ports and Bus Types: | USB Ports 4 PCI Express X16 |
Video Adapter: | Matrox Graphics Inc.
G200 SE A (PCI) |
Host Bus Adapter: | Lenovo
ThinkSystem RAID 530-4i Adapter
, Serial ATA (SATA) |
Hard Disk Drive: | Lenovo
ThinkSystem 2.5-inch 1TB 7.2K SATA 6Gb Hot Swap 512n HDD
, Serial ATA (SATA) |
Test Kit: | System Certification Kit 8.5.0-29.1 |
Config Notes
- Install: The SLES install was performed using a virtual DVD device.
- Kdump (SLE12SP2): the crash kernel reserved memory parameters were increased from the default to crashkernel=256M,high crashkernel=128M,low using YaST.
- The i40e used during testing is not SUSE SolidDriver Program compliant. The driver was installed from the following driver package: i40e-2.0.19.tar.gz. This driver package can be downloaded and installed after the SLES install. To obtain the driver go to: https://sourceforge.net/projects/e1000/files/i40e%20stable/2.0.19/. Then run the following commands 1) tar -zxvf i40e-2.0.19.tar.gz 2) cd i40e-2.0.19/src 3) make install 4) reboot.
|
Adapters and Drivers
| | | | | |
Matrox Graphics Inc.
G200 SE A (PCI) |
| Driver Type: Video Driver | Driver Name: mgag200.ko |
| Driver Date: 06-Jun-2020 | Driver Size: 82584 |
| Checksum: f4565df412097c9a985a175aae408518 |
|
Intel
Integrated Ethernet Connection X722 for 10GbE SFP+ (Quad-Port) |
Lenovo
ThinkSystem RAID 530-4i Adapter |
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Limited
1-1, Kamikodanaka 4-chome, Nakahara-ku
Kawasaki-shi
211-8588
JAPAN
|