UCSC-C220-M4S

UCSC-C220-M4S
Network Server
Fujitsu

21 Jul 2020
149379

SUSE YES Certified for the following products:
Operating Systems:

SUSE® Linux Enterprise Desktop 11 for AMD64 & Intel64 Service Pack 1 for SUSE® SLED 11

Product Description
For more information, please visit: http://www.cisco.com/c/en/us/support/servers-unified-computing/unified-computing-system/products-technical-reference-list.html

Tested Configuration:

Computer Type:	Rack Mount
Mother Board Revision:	74-12419-01
BIOS/uEFI:	UEFI-Legacy: C220M4.4.1.0.7.1004192042 (10/04/2019)
CPU:	Intel Xeon® Processor E5-2697A v4 2.60 GHz
RAM:	32 GB
Ports and Bus Types:	2 PCI Express X16 2 PCI Express X8 2 USB Ports
Video Adapter:	Matrox Graphics Inc. G200 SE A (PCI)
Host Bus Adapter:	LSI Logic MegaRAID SAS-3 3108 , Serial SCSI (SAS)
Hard Disk Drive:	2 Seagate® ST1000NM0023 , Serial SCSI (SAS)
Test Kit:	System Certification Kit 8.5.0-26.2

Config Notes

Power management: The System/Processor dynamic CPU frequency scaling functionality in SLES is not supported on POWER8 (PowerVM) as this functionality is provided by the POWER8 hardware itself.
Headless configuration - no graphics adapter. System configured using IBM remote Hardware Management Console (HMC) for graphics, keyboard and mouse.
Install: The SUSE® Linux Enterprise Server install was performed using a network install method.
Kdump: the crash kernel reserved memory parameters were changed based on the content in the following knowledge-base article: https://www.suse.com/support/kb/doc.php?id=3374462 SLES15 data is being updated in the same document and at current SLES 12 SP3 crashkernel values works fine.

Adapters and Drivers


Matrox Graphics Inc. G200 SE A (PCI)
	Driver Type: Video Driver	Driver Name: mgag200.ko
	Driver Date: 15-May-2020	Driver Size: 82584


LSI Logic MegaRAID SAS-3 3108
	Driver Type: HBA Driver	Driver Name: megaraid_sas.ko
	Driver Date: 15-May-2020	Driver Size: 307352

	Driver Version: 07.713.01.00-rc1

Intel Ethernet 1Gb 1-port I350 Adapter
	Driver Type: LAN Driver	Driver Name: igb.ko
	Driver Date: 15-May-2020	Driver Size: 496728

	Driver Version: 5.6.0-k

The term SUSE YES Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.

https://www.suse.com/product-certification/yes-certified/certification-requirements/

For more information regarding the specific test configuration, please contact:

Fujitsu
Fujitsu Technology Solutions GmbH
TSP CLI E SW OSE
Bürgermeister-Ulrich-Strasse 100
Augsburg 86199
GERMANY
Voice: +49 (0)821 804-3321

604775

UCSC-C220-M4S - Yes Bulletin 149379 | SUSE