|
 | PowerEdge XE2420
Network Server
Fujitsu | 30 Jun 2020
149325 |
SUSE YES Certified for the following products:
Operating Systems:
|
NetWare® 6.5
Support Pack 8 for NetWare® 6.5 |
Other Products:
|
Novell® Open Enterprise Server 2 Support Pack 1 |
Product Description
XE2420 is a 2 Socket/2U short depth server that supports NFV and MEC workloads at the far edge. Please visit www.dell.com for more information.
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | A01 |
| BIOS/uEFI: | UEFI: 1.1.7 (05/21/2020) |
| CPU: | 2 Intel
Xeon® Gold 6252N Processor 2.30 GHz |
| RAM: | 1536 GB |
| Ports and Bus Types: | 2 USB Ports 4 PCI Express X16 2 PCI Express X8 4 PCI Express X4 |
| Video Adapter: | Matrox®
G200eW3 |
| Host Bus Adapter: | Dell
PERC H740P Mini
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 KIOXIA
RM5 SSD, SAS, 12Gb/s (KRM5XRUG7T68)
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.4.0-41.2 |
Config Notes
- Install: Kernel boot parameter "nomodeset" was added during install.
- Power management: Hibernation / Suspend to Disk / ACPI S4 is NOT supported on this system.
- Power management: System/Processor does NOT support fan thermal scaling.
- Kdump: the crash kernel reserved memory parameter was changed to 256 (crashkernel=512M-:256M).
- Graphics: Video driver used in testing was downloaded from http://www.hp.com/support/workstations. Video driver is not SolidDriver-compliant and requires installation of kernel source and development tools.
|
Referenced Bulletins
142877
Adapters and Drivers
| | | | | |
| Matrox®
G200eW3 |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 14-May-2019 | Driver Size: 102080 |
| | Checksum: 07cad92cf9d842281e5e704f469b323c |
|
| 2 Broadcom®
BCM5720 dual-port PCI Express® GbE Network Interface Controller |
| | Driver Type: LAN Driver | Driver Name: tg3.ko |
| | Driver Date: 14-May-2019 | Driver Size: 330816 |
| | Checksum: dda91914051f466d1206dd7ffeb9d84f |
| | Driver Version: 3.137 |
|
| Dell
PERC H740P Mini |
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
TSP x86 E QA 1
Bürgermeister-Ulrich-Strasse 100
Augsburg
86199
GERMANY
Voice: +49 (0)821 804-2987
Website: http://ts.fujitsu.com/products/standard_servers/index.html
|