|
 | PowerEdge R6525
Network Server
BULL SAS | 15 Oct 2019
148740 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for x86 with XEN Service Pack 4 for SUSE® SLES 10 |
Product Description
Please visit www.dell.com for more information.
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | A00 |
| BIOS/uEFI: | UEFI: 1.0.0 (09/17/2019) |
| CPU: | 2 AMD
EPYC™ 7742 2.25 GHz |
| RAM: | 4 TB |
| Ports and Bus Types: | USB Ports 4 PCI Express X4 |
| Video Adapter: | Matrox®
G200eW3 |
| Host Bus Adapter: | Dell
PERC H745P MX
, Serial SCSI (SAS) |
| Hard Disk Drive: | Seagate®
EXOS Enterprise 15E900 900GB SAS (ST900MP0026)
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.3.0-27.1 |
Config Notes
- The e1000e LAN driver used during testing was installed from the following rpm: e1000e-1.5.1.tar.gz from http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=15817. This driver can be downloaded and installed after the SLES 11 SP1 install. This driver is externally supported.
|
Adapters and Drivers
| | | | | |
| Matrox®
G200eW3 |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 14-May-2019 | Driver Size: 102080 |
| | Checksum: 07cad92cf9d842281e5e704f469b323c |
|
| Broadcom®
BCM5720 dual-port PCI Express® GbE Network Interface Controller |
| | Driver Type: LAN Driver | Driver Name: tg3.ko |
| | Driver Date: 14-May-2019 | Driver Size: 330816 |
| | Checksum: dda91914051f466d1206dd7ffeb9d84f |
| | Driver Version: 3.137 |
|
| Dell
PERC H745P MX |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 14-May-2019 | Driver Size: 296104 |
| | Checksum: 0c021a1293826b2f98a1f58789f0ebda |
| | Driver Version: 07.707.50.00-rc1 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
BULL SAS
Les Clayes-sous-Bois
78340
FRANCE
Voice: 33 (0)1 30 80 70 00
Fax: 33 (0)1 30 80 73 73
|