|
 | PowerEdge R740xd
Network Server
IBM | 17 Sep 2019
148676 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server for IBM Power 15 Service Pack 1 for SUSE® SLES 15 |
Product Description
Please visit www.dell.com for more information.
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | A00 |
| BIOS/uEFI: | UEFI: 2.3.10 (08/15/2019) |
| CPU: | 2 Intel
Xeon® Gold 6242 Processor 2.80 GHz |
| RAM: | 1 TB |
| Ports and Bus Types: | 4 USB Ports 6 PCI Express X16 |
| Video Adapter: | Matrox®
G200eW3 |
| Host Bus Adapter: | Dell
PowerEdge RAID Controller H730P
, Serial SCSI (SAS) |
| Hard Disk Drive: | Seagate®
ST600MP0034
, Serial SCSI (SAS) Samsung®
PM1725a NVMe SSD
, NVMe |
| Test Kit: | System Certification Kit 8.3.0-27.1 |
Config Notes
- Headless configuration - no graphics adapter. System configured using IBM remote Hardware Management Console (HMC) for graphics, keyboard and mouse.
- Install: The SUSE® Linux Enterprise Server install was performed using a network install method.
- Kdump: the crash kernel reserved memory parameters were changed based on the content in the following knowledge-base article: https://www.suse.com/support/kb/doc.php?id=3374462 SLES15 data is being updated in the same document and at current SLES 12 SP3 crashkernel values works fine. Additional boot parameters are changed as per https://www.suse.com/support/kb/doc/?id=7023433
- Power management: The System/Processor dynamic CPU frequency scaling functionality in SLES is not supported on POWER9 (PowerVM) as this functionality is provided by the POWER9 hardware itself.
|
Adapters and Drivers
| | | | | |
| Matrox®
G200eW3 |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 31-Oct-2018 | Driver Size: 106720 |
| | Checksum: 69845dd9d9465dfc3d37d29b27d4ad5a |
|
| Intel
Ethernet 10G 4P X550 rNDC (Quad Port) |
| | Driver Type: LAN Driver | Driver Name: ixgbe.ko |
| | Driver Date: 31-Oct-2018 | Driver Size: 723688 |
| | Checksum: 709366b0e6e67c8c7f223491998f15f8 |
| | Driver Version: 5.1.0-k |
|
| Dell
PowerEdge RAID Controller H730P |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 31-Oct-2018 | Driver Size: 293840 |
| | Checksum: 635faadb60d3bceab0350cc9d3794166 |
| | Driver Version: 07.704.04.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|