|
 | SYS-1019P-WTR
Network Server
IBM | 16 Aug 2019
148551 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for x86 Service Pack 3 for SUSE® SLES 11 |
Product Description
For more information, please see Supermicro Computer product web site at https://www.supermicro.com/en/products/system/1U/1019/SYS-1019P-WTR.cfm
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | 1.02 |
| BIOS/uEFI: | UEFI: 2.1 (06/14/2018) |
| CPU: | Intel
Xeon® Silver 4112 Processor 2.60 GHz |
| RAM: | 32 GB |
| Ports and Bus Types: | 2 USB Ports 2 PCI Express X16 PCI Express X8 |
| Video Adapter: | ASPEED
AST2500 |
| Host Bus Adapter: | Broadcom®
MEGARAID SAS 9361-16I
, Serial SCSI (SAS) |
| Hard Disk Drive: | 6 Seagate®
Enterprise Capacity 2.5 HDD ST2000NX0273 2TB
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.3.0-27.1 |
Config Notes
- Kdump: the crash kernel reserved memory parameter in the elilo.conf file was changed from 128 to 512 (crashkernel=1024M-:512M) for kdump to function correctly.
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration. Hard Disk Configuration: RAID 0.
|
Referenced Bulletins
143476
Adapters and Drivers
| | | | | |
| ASPEED
AST2500 |
| | Driver Type: Video Driver | Driver Name: ast_drv.so |
| | Driver Date: 29-Oct-2018 | Driver Size: 114288 |
| | Checksum: b3f8daf7170ed565963992c55752fb17 |
| | Driver Version: 1.1.5 |
|
| Intel
Integrated Ethernet Connection X722 for 10GbE SFP+ (Dual-Port) |
| | Driver Type: LAN Driver | Driver Name: i40e.ko |
| | Driver Date: 31-Oct-2018 | Driver Size: 692832 |
| | Checksum: 81ff28d475b50f222e6919cb7b47f393 |
| | Driver Version: 2.3.2-k |
|
| Broadcom®
MEGARAID SAS 9361-16I |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 31-Oct-2018 | Driver Size: 293840 |
| | Checksum: 635faadb60d3bceab0350cc9d3794166 |
| | Driver Version: 07.704.04.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|