|
 | ProLiant DL360 Gen10 2.70 GHz Twenty-Eight Core
Network Server
IBM | 05 Apr 2019
147784 |
SUSE YES Certified for the following products:
Operating Systems:
|
SUSE® Linux Enterprise Desktop 11 for x86
Service Pack 1 for SUSE® SLED 11 |
Other Products:
|
SUSE® LINUX Enterprise Point of Service (SLEPOS) |
Product Description
For more information, please visit https://www.hpe.com/us/en/servers.html
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | Gen10 |
| BIOS/uEFI: | UEFI: U32 (02/02/2019) |
| CPU: | 2 Intel
Xeon® Platinum 8280 Processor 2.70 GHz |
| RAM: | Host Platform: 128 GB, 64-bit VM Guests: 31 GB, Single Max VM 64-bit Guest Tested Memory: 101 GB |
| Ports and Bus Types: | 5 USB Ports Serial PCI Express X16 PCI Express X8 |
| Video Adapter: | Matrox®
G200eH |
| Host Bus Adapter: | HPE
Smart Array P408i-a SR Gen10 Controller
, Serial SCSI (SAS) |
| Hard Disk Drive: | HP
146GB 6G SAS 15k rpm SFF (2.5-inch) Hard Drive
, Serial SCSI (SAS) |
| CD/DVD: | HP
DVDRW GUD0N
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 8.2.0-15.5 |
Config Notes
- Desktop Effects: Graphics driver/adapter does not support desktop effects.
- Power Management: System/Processor does not support throttling.
- Power Management: System/Processor does not support dynamic CPU frequency scaling.
- Power Management: S4 does not work with the default vesa driver. For it to work, the Intel driver should be used on this system. To change to the Intel driver, execute the following steps: (1) Edit the file /etc/X11/xorg.conf (2) Under section "Device", change the Driver parameter to "intel", then save. (3) Reboot the system.
|
Adapters and Drivers
| | | | | |
| Matrox®
G200eH |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 31-May-2018 | Driver Size: 105288 |
| | Checksum: 1eae76e8c5bf871e23a8cf646aaf1ed6 |
|
| HP
1Gb Ethernet 4-port 331i Adapter |
| | Driver Type: LAN Driver | Driver Name: tg3.ko |
| | Driver Date: 31-May-2018 | Driver Size: 330656 |
| | Checksum: 9fb046a84cd57de0907f4284c31c8623 |
| | Driver Version: 3.137 |
|
| HPE
Ethernet 10Gb 2-port 562T Adapter |
| | Driver Type: LAN Driver | Driver Name: ixgbe.ko |
| | Driver Date: 31-May-2018 | Driver Size: 720904 |
| | Checksum: afb7d404d70b31b1245d3f7fe21727f6 |
| | Driver Version: 5.1.0-k |
|
| | Driver Type: LAN Driver | Driver Name: ixgbevf.ko |
| | Driver Date: 31-May-2018 | Driver Size: 135016 |
| | Checksum: 03f49f1c60a6f0d4c936e1644e66c41c |
| | Driver Version: 4.1.0-k |
|
| HPE
Smart Array P408i-a SR Gen10 Controller |
| | Driver Type: HBA Driver | Driver Name: smartpqi.ko |
| | Driver Date: 31-May-2018 | Driver Size: 152696 |
| | Checksum: e3a32815d4f57fd19823c66f05b803d9 |
| | Driver Version: 1.1.2-126 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|