|
 | SA5212M5
Network Server
IBM | 29 Jan 2019
147579 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for x86 Service Pack 3 for SUSE® SLES 11 |
Product Description
www.inspur.com
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | SA5212M5 |
| BIOS/uEFI: | UEFI: 4.0.8 (10/17/2018) |
| CPU: | 2 Intel
Xeon® Platinum 8176 Processor 2.10 GHz |
| RAM: | 384 GB |
| Ports and Bus Types: | 6 USB Ports 3 PCI Express X8 4 PCI Express X16 |
| Video Adapter: | ASPEED
AST2500 |
| Host Bus Adapter: | LSI Logic
MegaRAID SAS 9361-8i
, Serial SCSI (SAS) |
| Hard Disk Drive: | Seagate®
Exos™ 7E8, 4TB, SAS (ST4000NM0025)
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.2.0-15.5 |
Config Notes
- Install: The SLES install was performed using virtual DVD media.
- Kdump: The crash kernel memory parameters were increased from default to crashkernel:768M high, crashkernel:256M low using YaST.
|
Referenced Bulletins
150775
Adapters and Drivers
| | | | | |
| ASPEED
AST2500 |
| | Driver Type: Video Driver | Driver Name: ast.ko |
| | Driver Date: 31-May-2018 | Driver Size: 130632 |
| | Checksum: 2b1d7c8b92a90ff3b3c5fce07dcc9ffe |
|
| Intel
Ethernet Server Adapter I350-T2 (Dual Port) |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 31-May-2018 | Driver Size: 489024 |
| | Checksum: d5232654a1debc91e634dcdcdf5d1fc8 |
| | Driver Version: 5.4.0-k |
|
| LSI Logic
MegaRAID SAS 9361-8i |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 31-May-2018 | Driver Size: 288872 |
| | Checksum: 05a11c19ea5020998382f29c3ae31971 |
| | Driver Version: 07.704.04.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|