|
 | UCS C125
Network Server
Inspur Corporation | 19 Dec 2018
147463 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 Service Pack 5 for SUSE® SLES 12 |
Product Description
UCS Rack server
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | 74-119423-01 |
| BIOS/uEFI: | UEFI: C125.4.0.2a.0.1105182131 (11/05/2018) |
| CPU: | AMD
EPYC™ 7351 2.40 GHz |
| RAM: | 64 GB |
| Ports and Bus Types: | PCI Express X8 PCI Express X16 |
| Video Adapter: | Matrox Graphics Inc.
G200 SE A (PCI) |
| Host Bus Adapter: | Broadcom®
SAS3508
, Serial ATA (SATA) |
| Hard Disk Drive: | Cisco
UCS-SD200G0KA2-T
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 8.1.0-83.2 |
Config Notes
- The pci=use_crs kernel parameter is required.
- SLES-10-SP4 (x86_64): System was tested with rev .89.1 update kernel due to a problem making network connections. This update is available from support.novell.com or standard online update methods. The drivers used are part of this update.
|
Adapters and Drivers
| | | | | |
| Matrox Graphics Inc.
G200 SE A (PCI) |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 31-May-2018 | Driver Size: 105288 |
| | Checksum: 1eae76e8c5bf871e23a8cf646aaf1ed6 |
|
| Broadcom®
SAS3508 |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 31-May-2018 | Driver Size: 288872 |
| | Checksum: 05a11c19ea5020998382f29c3ae31971 |
| | Driver Version: 07.704.04.00-rc1 |
|
| Cisco
QLogic FastLinQ 8400 10Gbps |
| | Driver Type: LAN Driver | Driver Name: qede.ko |
| | Driver Date: 31-May-2018 | Driver Size: 232496 |
| |
| | Driver Version: 8.10 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Inspur Corporation
Building C. NO.2
Xinxi Road
Shangdi, Haidian District
Beijing
100080
CHINA
|