|
 | UCSB-B200-M5
Network Server
IBM | 18 Dec 2018
147460 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with XEN Service Pack 3 for SUSE® SLES 11 |
Product Description
UCS B200 M5
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 73-17637-07 |
| BIOS/uEFI: | UEFI: B200M5.4.0.0.29.0604182102 (06/04/2018) |
| CPU: | 2 Intel
Xeon® Gold 6142 Processor 2.60 GHz |
| RAM: | 32 GB |
| Ports and Bus Types: | PCI Express X8 PCI Express X16 |
| Video Adapter: | Matrox Graphics Inc.
G200 SE A (PCI) |
| Host Bus Adapter: | LSI Logic
MegaRAID SAS-3 3008
, Serial SCSI (SAS) |
| Hard Disk Drive: | Toshiba
AL14SEB030N, 300 GB
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.2.0-15.4 |
Config Notes
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration.
- SR-IOV/PCI Pass-through: Current system configuration does not support network SR-IOV or network PCI pass-through.
|
Adapters and Drivers
| | | | | |
| Matrox Graphics Inc.
G200 SE A (PCI) |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 31-Oct-2018 | Driver Size: 106720 |
| | Checksum: 69845dd9d9465dfc3d37d29b27d4ad5a |
|
| 2 Cisco
UCS VIC 1340 (NIC) |
| | Driver Type: LAN Driver | Driver Name: enic.ko |
| | Driver Date: 31-Oct-2018 | Driver Size: 202160 |
| |
| | Driver Version: 2.3.0.45 |
|
| LSI Logic
MegaRAID SAS-3 3008 |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 31-Oct-2018 | Driver Size: 293840 |
| | Checksum: 635faadb60d3bceab0350cc9d3794166 |
| | Driver Version: 07.704.04.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|