|
| PRIMERGY® TX2560 M2
Network Server
VMware, Inc. | 21 Nov 2018
147235 |
SUSE YES Certified for the following products:
Virtual Machines (Guests OS):
|
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
|
Arch:
64 |
Mode:
Paravirtualized |
|
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
|
Arch:
64 |
Mode:
Fully Virtualized |
|
Windows Server 2012 R2 |
|
Arch:
64 |
Mode:
Fully Virtualized |
Product Description
The FUJITSU Server PRIMERGY TX2560 M2 offers maximum performance, expandability and highest availability without any compromises. Branches, data centers and SMEs value the performance of up to two Intel® Xeon® E5 v4 processors in combination with a maximum 1536 GB DDR4 memory. Up to 10 extension slots and up to 32 2.5-inch hard disks enable excellent expandability options. Thanks to a redundant power supply and fans as well as a range of different RAID controllers the Tower Server ensures top availability levels and “peace of mind”. The server is thus ideal for performance hungry applications, virtualization solutions and storage demanding scenarios. Furthermore, the comprehensive Fujitsu ServerView® Suite provides support for administrators during server installation, deployment and administration. For more detailed information, please refer to the data sheet at: http://docs.ts.fujitsu.com/dl.aspx?id=2a169d43-2675-4219-b236-d7ccd525dc35
Tested Configuration:
| Computer Type: | Tower |
| Mother Board Revision: | D3289-B |
| BIOS/uEFI: | UEFI: R1.20.0 (06/15/2018) |
| CPU: | 2 Intel
Xeon® Processor E5-2603 v4 1.70 GHz |
| RAM: | Host: 48 GB, Max VM: 40 GB, Multiple VMs: 13 GB |
| Ports and Bus Types: | 9 USB Ports
3 PCI Express X16
5 PCI Express X8
4 PCI Express X4 |
| Video Adapter: | Matrox®
G200e |
| Host Bus Adapter: | Fujitsu
PRAID CP400i
, Serial ATA (SATA) |
| Hard Disk Drive: | 2 Seagate®
ST1000NM0033
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 8.1.0-83.2 |
Config Notes
- Install: System installed via USB flash drive UEFI boot; the OS was installed using the UEFI boot loader and system configuration.
- SR-IOV: System was tested using SR-IOV where a virtual network adapter was given to a SLES 16.0 FV guest. One port of the integrated Intel Ethernet Network Adapter X710-T2L for OCP 3.0 (Dual Port) was used in this testing.
|
Adapters and Drivers
| | | | | |
| Matrox®
G200e |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 31-May-2018 | Driver Size: 105288 |
| | Checksum: 1eae76e8c5bf871e23a8cf646aaf1ed6 |
|
|
| Fujitsu
DynamicLOM based on Emulex XE100 series (2x 10Gbit/s) |
| | Driver Type: LAN Driver | Driver Name: be2net.ko |
| | Driver Date: 31-May-2018 | Driver Size: 292464 |
| | Checksum: 393bd3f3b935c41d800f1cc0f636da9f |
| | Driver Version: 11.4.0.0 |
|
| Fujitsu
PRAID CP400i |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 31-May-2018 | Driver Size: 288872 |
| | Checksum: 05a11c19ea5020998382f29c3ae31971 |
| | Driver Version: 07.704.04.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
VMware, Inc.
3401 Hillview Ave
Palo Alto
, CA
94304
Voice: 1-650-427-5000
Toll Free: 1-877-486-9273
Fax: 650-427-5001
Website: www.vmware.com
|