|
 | PRIMERGY® RX1330 M2
Network Server
IBM | 19 Nov 2018
147226 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 with XEN Service Pack 4 for SUSE® SLES 10 |
Virtual Machines (Guests OS):
|
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
|
Arch:
64 |
Mode:
Fully Virtualized |
|
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
|
Arch:
64 |
Mode:
Paravirtualized |
|
Windows Server 2012 R2 |
|
Arch:
64 |
Mode:
Fully Virtualized |
Product Description
The FUJITSU Server PRIMERGY RX1330 M2 is a mono-socket rack server designed to provide a solution for small budgets, yet enabling a rich set of optional expansions to best meet individual demands. Its usage patterns cover file, infrastructure and communication or collaboration applications by delivering up to 64 GB RAM, up to 3 PCIe slots and up to 10 2.5-inch hard disk drives. Moreover, this 1U server allows for diverse individual configurations with optional features, such as hot-plug power supply units, redundant fans and RAID controller. By delivering high energy efficiency and operation in higher ambient temperature thanks to optional Cool-safe® Advanced Thermal Design, the PRIMERGY RX1330 M2 also contributes to very low operational costs. For more detailed information, please refer to the data sheet at: http://docs.ts.fujitsu.com/dl.aspx?id=a7e754be-97dc-45af-a168-3cbd32d97ee3
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | D3375 |
| BIOS/uEFI: | UEFI: R1.22.0 (05/15/2018) |
| CPU: | Intel
Xeon® Processor E3-1240L v5 2.10 GHz |
| RAM: | Host: 48 GB, Max VM: 39 GB, Multiple VMs: 13 GB |
| Ports and Bus Types: | 6 USB Ports 2 PCI Express X8 PCI Express X4 |
| Video Adapter: | Matrox®
G200e |
| Host Bus Adapter: | Fujitsu
PRAID EP420i
, Serial ATA (SATA) |
| Hard Disk Drive: | 4 Western Digital
WD RE4 7200 RPM Enterprise SATA hard drive - WD5003ABYX
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 8.1.0-83.2 |
Config Notes
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration. Storage configuration: RAID 6. Tested as a 2-node scalable partition with 4 Compute Books.
- SR-IOV: System was tested using SR-IOV where a virtual network adapter was given to a SLES 15 SP1 guest. One of the Emulex Corporation VFA5 ML2 10GbE SFP+ adapters was used in this testing.
|
Referenced Bulletins
148264
Adapters and Drivers
| | | | | |
| Matrox®
G200e |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 31-May-2018 | Driver Size: 105288 |
| | Checksum: 1eae76e8c5bf871e23a8cf646aaf1ed6 |
|
| 2 Intel
Ethernet Controller I210-AT |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 31-May-2018 | Driver Size: 489024 |
| | Checksum: d5232654a1debc91e634dcdcdf5d1fc8 |
| | Driver Version: 5.4.0-k |
|
| Fujitsu
PRAID EP420i |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 31-May-2018 | Driver Size: 288872 |
| | Checksum: 05a11c19ea5020998382f29c3ae31971 |
| | Driver Version: 07.704.04.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|