PowerEdge R940

PowerEdge R940
Network Server
Hewlett-Packard Company

30 Jul 2018
146962

SUSE YES Certified for the following products:
Operating Systems:

SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 Service Pack 4 for SUSE® SLES 11

Product Description
Please visit www.dell.com for detail information.

Tested Configuration:

Computer Type:	Rack Mount
Mother Board Revision:	A00
BIOS/uEFI:	UEFI: 1.4.8 (05/21/2018)
CPU:	4 Intel Xeon® Platinum 8180M Processor 2.50 GHz
RAM:	6 TB
Ports and Bus Types:	3 USB Ports 7 PCI Express X16
Video Adapter:	Matrox® G200eW3
Host Bus Adapter:	Dell PowerEdge RAID Controller H730P , Serial SCSI (SAS)
Hard Disk Drive:	Seagate® ST1200MM0088 , Serial SCSI (SAS)
Test Kit:	System Certification Kit 8.1.0-80.2

Config Notes

Power management: Hibernation/Suspend to Disk/ACPI S4 is NOT supported on this system.
Power management: System/Processor does NOT support fan thermal scaling.
Graphics: Video driver used in testing was downloaded from http://www.hp.com/support/workstations. Video driver is not SolidDriver-compliant and requires installation of kernel source and development tools.
Kdump: the crash kernel reserved memory parameter was changed to 256 (crashkernel=512M-:256M) for kdump to function correctly.
System was tested with an Intel I210-T1 added as a second network adapter. The standard system configuration does not include the I210-T1 adapter.

Referenced Bulletins
142876

Adapters and Drivers


Matrox® G200eW3
	Driver Type: Video Driver	Driver Name: mgag200.ko
	Driver Date: 31-May-2018	Driver Size: 105288
	Checksum: 1eae76e8c5bf871e23a8cf646aaf1ed6

Intel Gigabit 4P I350 bNDC (Quad Port)
	Driver Type: LAN Driver	Driver Name: igb.ko
	Driver Date: 31-May-2018	Driver Size: 489024
	Checksum: d5232654a1debc91e634dcdcdf5d1fc8
	Driver Version: 5.4.0-k

Dell PowerEdge RAID Controller H730P
	Driver Type: HBA Driver	Driver Name: megaraid_sas.ko
	Driver Date: 31-May-2018	Driver Size: 288872
	Checksum: 05a11c19ea5020998382f29c3ae31971
	Driver Version: 07.704.04.00-rc1

The term SUSE YES Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.

https://www.suse.com/product-certification/yes-certified/certification-requirements/

For more information regarding the specific test configuration, please contact:

Hewlett-Packard Company
HP Servers Division
20555 SH249
Houston , TX 77070

569482

PowerEdge R940 - Yes Bulletin 146962 | SUSE