|
 | PowerEdge R940
Network Server
Hewlett-Packard Company | 30 Jul 2018
146961 |
SUSE YES Certified for the following products:
Operating Systems:
|
SUSE® Linux Enterprise Desktop 11 for x86
Service Pack 1 for SUSE® SLED 11 |
Product Description
Please visit www.dell.com for detail information.
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | A00 |
| BIOS/uEFI: | UEFI: 1.4.8 (05/21/2018) |
| CPU: | 4 Intel
Xeon® Platinum 8180M Processor 2.50 GHz |
| RAM: | Host Platform: 6 TB, 64-bit VM Guests: 1536 GB, Single Max VM 64-bit Guest Tested Memory: 3840 GB |
| Ports and Bus Types: | 3 USB Ports 7 PCI Express X16 |
| Video Adapter: | Matrox®
G200eW3 |
| Host Bus Adapter: | Dell
PowerEdge RAID Controller H730P
, Serial SCSI (SAS) |
| Hard Disk Drive: | Seagate®
ST1200MM0088
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.1.0-80.2 |
Config Notes
- Power Management: xhci module (for USB 3.0) is experimental and prevents resume from S3/S4 states. Suggested solution: prevent loading of xhci by adding the line "blacklist xhci" to the /etc/modprobe.d/blacklist file. If the xhci module is needed, it may be force-unloaded when entering S3/S4 by specifying SUSPEND_MODULES="xhci" in a file under /etc/pm/config.d. Any USB 3.0 devices should be unmounted before force-unloading the xhci module.
- Graphics: Video driver used in testing is PLDP-compliant and may be installed by adding http://download.nvidia.com/novell/sle11sp1 as an Add-On Product.
- Graphics: nvidia-settings used to enable/disable external display. Fn+F4 does not switch displays.
|
Adapters and Drivers
| | | | | |
| Matrox®
G200eW3 |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 31-May-2018 | Driver Size: 105288 |
| | Checksum: 1eae76e8c5bf871e23a8cf646aaf1ed6 |
|
| Intel
Gigabit 4P I350 bNDC (Quad Port) |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 31-May-2018 | Driver Size: 489024 |
| | Checksum: d5232654a1debc91e634dcdcdf5d1fc8 |
| | Driver Version: 5.4.0-k |
|
| Dell
PowerEdge RAID Controller H730P |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 31-May-2018 | Driver Size: 288872 |
| | Checksum: 05a11c19ea5020998382f29c3ae31971 |
| | Driver Version: 07.704.04.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Hewlett-Packard Company
Personal Systems Group - Notebooks
20555 SH249
Houston
, TX
77070
Website: http://www.hp.com
|