|
 | PRIMERGY® RX1330 M3
Network Server
Positivo Tecnologia S.A. | 16 Jul 2018
146814 |
SUSE YES Certified for the following products:
Operating Systems:
|
SUSE® Linux Enterprise Desktop 12 for AMD64 & Intel64 |
Product Description
The FUJITSU Server PRIMERGY RX1330 M3 is a mono-socket rack server designed to meet small budgets by delivering highest energy efficiency and a rich set of optional expansions to meet individual demands. Optimized for infrastructure and communication applications as well as administration and small file server, this 1U systems features up to 64 GB RAM, up to 3 PCIe slots and up to 10 hard disk drives. For more technical details, please refer to the data sheet at: https://sp.ts.fujitsu.com/dmsp/Publications/public/ds-py-rx1330-m3.pdf
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | D3375-B12 |
| BIOS/uEFI: | UEFI: R1.18.0 (04/26/2018) |
| CPU: | Intel
Xeon® Processor E3-1240 v6 @ 3.7GHz |
| RAM: | Host: 32 GB, Max VM: 24GB, Multiple VMs: 8 GB |
| Ports and Bus Types: | 6 USB Ports PCI Express X4 2 PCI Express X8 |
| Video Adapter: | Matrox®
G200e |
| Host Bus Adapter: | Fujitsu
PRAID EP420i
, Serial SCSI (SAS) |
| Hard Disk Drive: | 4 Hitachi GST
UltraStar C10K1800 HUC101830CSS204
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.1.0-80.1 |
Config Notes
- Power management: Sleep/Suspend to RAM/ACPI S3 is NOT supported on this system.
- Power management: System/Processor does NOT support fan thermal scaling.
- Kdump: the crash kernel reserved memory parameters were changed based on the content in the following knowledge-base article: http://www.novell.com/support/kb/doc.php?id=3374462.
- Install: OS installed via USB CD/DVD drive.
|
Referenced Bulletins
145492
Adapters and Drivers
| | | | | |
| Matrox®
G200e |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 02-May-2018 | Driver Size: 105288 |
| | Checksum: 33744b54c1e2edb1c64d9a288005bdc8 |
|
| 2 Intel
Ethernet Controller I210-AT |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 02-May-2018 | Driver Size: 489024 |
| | Checksum: 99ed785fd93461cfe24eeddc542a69dd |
| | Driver Version: 5.4.0-k |
|
| Fujitsu
PRAID EP420i |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 02-May-2018 | Driver Size: 288872 |
| | Checksum: e67ac5239c6b755dd0a1bffc9ee715f4 |
| | Driver Version: 07.704.04.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Positivo Tecnologia S.A.
Rua Javari, 1255 Distrito Industrial
Manaus
, AM
CEP 69075-110
BRAZIL
|