|
 | PRIMERGY® RX2530 M4
Network Server
Sun Microsystems, Inc. | 16 Jul 2018
146811 |
SUSE YES Certified for the following products:
Operating Systems:
|
SUSE® LINUX Enterprise Server 9 for AMD64® & Intel® EM64T®
Service Pack 4 for SUSE® SLES 9 |
Product Description
The FUJITSU Server PRIMERGY RX2530 M4 is a rack server that provides high performance, expandability and energy efficiency in a 1U space saving housing. The PRIMERGY RX2530 M4 is ideal for virtualization, scale-out scenarios, and small databases as well as for high performance computing thanks to the high performance of the new Intel® Xeon® Processor Scalable Family CPUs with up to 28 cores and the latest DDR4 memory technology. The limited space of a 1U chassis offers highly efficient power supply units, their redundancy on demand and the optional Cool-safe® Advanced Thermal Design this will result in lower operational costs. For more detailed information, please refer to the data sheet at: http://docs.ts.fujitsu.com/dl.aspx?id=3dc20cf0-3801-4464-b5ea-570510e5f105
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | D3383 |
| BIOS/uEFI: | UEFI: R1.18.0 (02/22/2018) |
| CPU: | 2 Intel
Xeon® Gold 6142 Processor 2.60 GHz |
| RAM: | 72 GB |
| Ports and Bus Types: | 5 USB Ports PCI Express X8 3 PCI Express X16 |
| Video Adapter: | Matrox®
G200e |
| Host Bus Adapter: | Fujitsu
PRAID EP400i
, Serial SCSI (SAS) |
| Hard Disk Drive: | 4 Hitachi GST
UltraStar C10K1800 HUC101830CSS204
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.1.0-80.1 |
Config Notes
- Power management: Hibernation / Suspend to Disk / ACPI S4 is NOT supported on this system.
- The BIOS keyboard setting was changed to traditional mode.
- The BIOS NIC setting was changed to always Enabled.
- Install: System installed using an external USB thumb drive.
- The BIOS SATA controller setting was changed to AHCI/NVME mode.
- Kdump (SLES15): the crash kernel reserved memory parameters were increased from the default to crashkernel=500M,high crashkernel=300M,low using YaST.
- Secure Boot: System was tested with secure boot enabled.
|
Adapters and Drivers
| | | | | |
| Matrox®
G200e |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 02-May-2018 | Driver Size: 105288 |
| | Checksum: 33744b54c1e2edb1c64d9a288005bdc8 |
|
| Intel
Ethernet Controller I350-AM2 (Dual Port) |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 02-May-2018 | Driver Size: 489024 |
| | Checksum: 99ed785fd93461cfe24eeddc542a69dd |
| | Driver Version: 5.4.0-k |
|
| Fujitsu
PRAID EP400i |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 02-May-2018 | Driver Size: 288872 |
| | Checksum: e67ac5239c6b755dd0a1bffc9ee715f4 |
| | Driver Version: 07.704.04.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Sun Microsystems, Inc.
4150 Network Circle
Santa Clara
, CA
95054
|