|
 | Express5800/R120h-1E
Network Server
NEC Corporation | 30 Jan 2018
146542 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 with XEN Service Pack 3 for SUSE® SLES 10 |
Product Description
For more information please visit https://www.nec.com
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | Gen10 |
| BIOS/uEFI: | UEFI: 1.20 (08/18/2017) |
| CPU: | 2 Intel
Xeon® Platinum 8164 Processor 2.00 GHz |
| RAM: | 1024 GB |
| Ports and Bus Types: | 4 USB Ports Serial 3 PCI Express X8 |
| Video Adapter: | Matrox®
G200eH |
| Host Bus Adapter: | Intel
C622 Chipset
, Serial ATA (SATA) HPE
Smart Array P408i-a SR Gen10 Controller
, Serial SCSI (SAS) |
| Hard Disk Drive: | HPE
1.8TB SAS 12G Enterprise 10K SFF
, Serial SCSI (SAS) |
| CD/DVD: | HP
9.5mm SATA DVD-RW JackBlack G9 Optical Drive
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 7.6.0-53.1 |
Config Notes
- The pci:use_crs kernel boot parameter is required.
- SLES-10-SP3 (x86_64): System was tested with rev .58.1 update kernel due to a kernel oops which may occur when initializing the network devices. This update is available from support.novell.com or standard online update methods. The drivers used are part of this update.
- The following Xen hypervisor boot parameters are required: dom0_mem=1024M xenheap_megabytes=64
|
Referenced Bulletins
131280
Adapters and Drivers
| | | | | |
| Matrox®
G200eH |
| | Driver Type: Video Driver | Driver Name: modesetting_drv.so |
| | Driver Date: 15-Oct-2016 | Driver Size: 73936 |
| | Checksum: 9543c0db503bf1f52b6304492e605509 |
| | Driver Version: 1.18.3 |
|
| HPE
Ethernet 1Gb 2-port 368i Adapter |
| | Driver Type: LAN Driver | Driver Name: i40e.ko |
| | Driver Date: 12-Aug-2017 | Driver Size: 7593054 |
| | Checksum: c96218aca8ef807040e61174fc512cb3 |
| | Driver Version: 2.0.23 |
|
| Intel
C622 Chipset |
| | Driver Type: HBA Driver | Driver Name: ahci.ko |
| | Driver Date: 25-Oct-2016 | Driver Size: 72895 |
| | Checksum: f0ad0f11072e317bc80570a7483343e9 |
| | Driver Version: 3.0 |
|
| HPE
Smart Array P408i-a SR Gen10 Controller |
| | Driver Type: HBA Driver | Driver Name: smartpqi.ko |
| | Driver Date: 09-Jun-2017 | Driver Size: 124558 |
| | Checksum: 2418e374544c1ce5c037c1fc4a5c07b1 |
| | Driver Version: 1.0.4-100 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
NEC Corporation
1-10 Nissin-cho, Fuchu-shi
Tokyo
183-8501
JAPAN
Voice: (+81) 42 333 1324
Fax: (+81) 42 333 1821
|