PRIMERGY® TX1330 M3

PRIMERGY® TX1330 M3
Network Server
Cisco Systems, Inc.

06 Dec 2017
146368

SUSE YES Certified for the following products:
Operating Systems:

SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 10

Virtual Machines (Guests OS):

2 SUSE® Linux Enterprise Server 11 for AMD64 & Intel64
	SP: Service Pack 4 for SUSE SLES 11	Arch: 64	Mode: Fully Virtualized
Windows Server 2012 R2
	Arch: 64	Mode: Fully Virtualized

Product Description
The FUJITSU Server PRIMERGY TX1330 M3 is a highly expandable mono-socket server for Small and Medium Enterprises which need application oriented performance coupled with high storage expandability, and growth potential via a comprehensive range of options. It features the latest Intel® Xeon ® E3-1200 v6 product family processors, plus up to 64 GB RAM for managing application oriented performance for today and tomorrow. The server is designed for scalability and workload versatility with features such as up to twenty-four 2.5-inch drives, data backup options, and 4x PCIe slots coupled with compatible RAID and networking options. Reliability is enhanced with the Fujitsu Battery Backup unit, and high-efficiency (94%) redundant power supplies. Comprehensive server management plus silent operation ease both administration and deployment, making the platform ideal for SME environments. For more technical details, please refer to the data sheet at: https://sp.ts.fujitsu.com/dmsp/Publications/public/ds-py-tx1330-m3.pdf

Tested Configuration:

Computer Type:	Tower
Mother Board Revision:	D3373-B12
BIOS/uEFI:	UEFI: 1.1 (03/09/2017)
CPU:	Intel Xeon® Processor E3-1220 v6 @ 3.00 GHz
RAM:	16 GB
Ports and Bus Types:	Serial 6 USB Ports 2 PCI Express X8 PCI Express X4 PCI Express X1
Video Adapter:	Matrox® G200e
Host Bus Adapter:	Fujitsu PRAID EP420i , Serial SCSI (SAS)
Hard Disk Drive:	2 Hitachi GST UltraStar C10K1800 HUC101830CSS204 , Serial SCSI (SAS)
Test Kit:	System Certification Kit 7.7.0-25.1

Config Notes

System certification testing was performed with a SLES 12 SP3 64-bit virtual machine installed on UEFI firmware with Secure Boot enabled and configured with up to 128 CPUs and 6128 GB of memory.
VMware guest OS installation information can be found at:http://partnerweb.vmware.com/GOSIG/SLE_12.html.
VMware recommends using the Open VM Tools redistributed by operating system vendors. For additional information, see knowledge base article 2073803 at http://kb.vmware.com/kb/2073803.
VMware recommends using the paravirtual drivers contributed upstream and redistributed by operating system vendors. For additional information, see knowledge base article 2073804 at https://kb.vmware.com/kb/2073804.
The VMware Memory Ballooning driver included in SLES 12 SP3 is auto loaded to improve the virtual machine memory performance.

Adapters and Drivers


Matrox® G200e
	Driver Type: Video Driver	Driver Name: mga_drv.so
	Driver Date: 18-May-2015	Driver Size: 190720
	Checksum: eeec94d7ef85cad092007144321a8b30
	Driver Version: 1.4.11

2 Intel Ethernet Controller I210-AT
	Driver Type: LAN Driver	Driver Name: igb.ko
	Driver Date: 24-Jun-2015	Driver Size: 334639
	Checksum: 9d13a78672ff61d57ef1b462ada1ae55
	Driver Version: 5.2.15-k

Fujitsu PRAID EP420i

The term SUSE YES Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.

https://www.suse.com/product-certification/yes-certified/certification-requirements/

For more information regarding the specific test configuration, please contact:

Cisco Systems, Inc.
170 West Tasman Dr.
San Jose , CA 95134
Voice: (408) 526-4000
Toll Free: (800) 553-NETS or (800) 553-6387
Website: http://www.cisco.com/c/en/us/support/servers-unified-computing/unified-computing-system/products-technical-reference-list.html

585758

PRIMERGY® TX1330 M3 - Yes Bulletin 146368 | SUSE