|
 | PRIMERGY® RX1330 M3
Network Server
Lenovo Group Limited | 06 Dec 2017
146362 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Desktop 11 for AMD64 & Intel64 Service Pack 3 for SUSE® SLED 11 |
Virtual Machines (Guests OS):
| 2
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 |
|
SP:
Service Pack 4 for SUSE SLES 11 |
Arch:
64 |
Mode:
Fully Virtualized |
|
Windows Server 2012 R2 |
|
Arch:
64 |
Mode:
Fully Virtualized |
Product Description
The FUJITSU Server PRIMERGY RX1330 M3 is a mono-socket rack server designed to meet small budgets by delivering highest energy efficiency and a rich set of optional expansions to meet individual demands. Optimized for infrastructure and communication applications as well as administration and small file server, this 1U systems features up to 64 GB RAM, up to 3 PCIe slots and up to 10 hard disk drives. For more technical details, please refer to the data sheet at: https://sp.ts.fujitsu.com/dmsp/Publications/public/ds-py-rx1330-m3.pdf
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | D3375-B12 |
| BIOS/uEFI: | UEFI: 1.1 (03/09/2017) |
| CPU: | Intel
Xeon® Processor E3-1220 v6 @ 3.00 GHz |
| RAM: | 16 GB |
| Ports and Bus Types: | Serial 6 USB Ports 2 PCI Express X8 PCI Express X4 |
| Video Adapter: | Matrox®
G200e |
| Host Bus Adapter: | Fujitsu
PRAID EP420i
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 Hitachi GST
UltraStar C10K1800 HUC101830CSS204
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 7.7.0-25.1 |
Config Notes
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration. Hard disk configuration: RAID 0. Xen Hypervisor: the hypervisor was booted with and requires the following additional load parameters: dom0_mem=16G dom0_max_vcpus=8.
- SR-IOV: System was tested using SR-IOV where a virtual network adapter was given to the SLES 15 SP1 FV guest. One of the Intel Ethernet Connection X722 for 10GbE SFP+ adapters was used in this testing.
- Serial/USB/VGA port(s): provided through KVM connector console breakout cable which supplies one RS232 serial port, one VGA port and two USB ports, system also has one built-in USB port.
|
Adapters and Drivers
| | | | | |
| Matrox®
G200e |
| | Driver Type: Video Driver | Driver Name: mga_drv.so |
| | Driver Date: 18-May-2015 | Driver Size: 190720 |
| | Checksum: eeec94d7ef85cad092007144321a8b30 |
| | Driver Version: 1.4.11 |
|
| 2 Intel
Ethernet Controller I210-AT |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 24-Jun-2015 | Driver Size: 334639 |
| | Checksum: 9d13a78672ff61d57ef1b462ada1ae55 |
| | Driver Version: 5.2.15-k |
|
| Fujitsu
PRAID EP420i |
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Lenovo Group Limited
P.R.China
Bei Jing
Haidian District,Shangdi Chuangye Road 6#
Bei Jing
, N/A
100085
CHINA
|