|
 | NF5280M5
Network Server
Kyocera Mita Corporation | 24 Oct 2017
146095 |
SUSE YES Certified for the following products:
Operating Systems:
| NetWare® 6.5 Support Pack 8 for NetWare® 6.5 |
Product Description
For more information, please visit http://www.inspur.com.
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | 00001 |
| BIOS/uEFI: | UEFI: (09/20/2017) |
| CPU: | 2 Intel
Xeon® Platinum 8176 Processor 2.10 GHz |
| RAM: | 32 GB |
| Ports and Bus Types: | 6 USB Ports 4 PCI Express X16 3 PCI Express X8 |
| Video Adapter: | ASPEED
AST2500 |
| Host Bus Adapter: | LSI Logic
MegaRAID SAS 9361-8i
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 Seagate®
ST600MM0088 (600GB)
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 7.7.0-25.1 |
Config Notes
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration.
- PCI Network Pass-Through: System was tested using PCI pass-through where one of the host network adapters was given to one of the SLES 15 x86-64 guests. One port of the embedded Fujitsu DynamicLOM based on Emulex XE100 series (2x 10Gbit/s) adapter was used during this testing.
|
Adapters and Drivers
| | | | | |
| ASPEED
AST2500 |
| | Driver Type: Video Driver | Driver Name: drm.ko |
| | Driver Date: 25-Oct-2016 | Driver Size: 628983 |
| | Checksum: 917601927ed3ac76295bd6a5c5521679 |
|
| Intel
Ethernet Server Adapter I350-T2 (Dual Port) |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 25-Oct-2016 | Driver Size: 351071 |
| | Checksum: b8dee794a1123732c7ba8475033703e3 |
| | Driver Version: 5.3.0-k |
|
| LSI Logic
MegaRAID SAS 9361-8i |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 25-Oct-2016 | Driver Size: 216703 |
| | Checksum: 43d97f95db88b476471065c1667d0589 |
| | Driver Version: 06.810.09.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Kyocera Mita Corporation
2-28, 1-Chome, Tamatsukuri, Chuo-ku
Osaka
540-8585
JAPAN
Voice: +81-6-6764-3555
Fax: +81-6-6764-3980
Website: www.kyoceramita.com
|