|
 | UCS B420 M4
Network Server
Elo Touch Solutions, Inc. | 25 Jan 2017
145359 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Desktop 12 for AMD64 & Intel64 |
Virtual Machines (Guests OS):
2
SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 |
|
SP:
Service Pack 1 for SUSE SLES 12 |
Arch:
64 |
Mode:
Fully Virtualized |
Product Description
UCS B420 M4; http://www.cisco.com
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | 4.0 |
BIOS/uEFI: | B420M4.3.1.2e.0.083020161203 |
CPU: | 4 Intel
Xeon® Processor E5-4620 v4 2.10 GHz |
RAM: | Host: 128 GB; Max VM: 112 GB; Multiple VMs: 36 GB each |
Ports and Bus Types: | 3 PCI Express X16 USB Ports |
Video Adapter: | Matrox®
MGA G200e |
Host Bus Adapter: | Cisco
UCS VIC 1340 (HBA)
, FibreChannel LSI Logic
MegaRAID SAS-3 3108
, Serial SCSI (SAS) |
Hard Disk Drive: | Seagate®
ST9500620NS 500GB SATA
, Serial ATA (SATA) |
Storage Area Network (SAN) Device: | EMC
Symmetrix VMAX |
Test Kit: | System Certification Kit 7.6.0-44.1 |
Config Notes
- Kdump: the crash kernel reserved memory parameters were changed based on the content in the following knowledge-base article: https://www.suse.com/support/kb/doc.php?id=3374462
- Headless configuration - no graphics adapter. System configured using IBM remote Hardware Management Console (HMC) for graphics, keyboard and mouse
- Install: The SUSE® Linux Enterprise Server install was performed using a network install method
- Power management: The System/Processor dynamic CPU frequency scaling functionality in SLES is not supported on POWER8 (PowerVM) as this functionality is provided by the POWER8 hardware itself.
- Maintenance updates: the SUSE® Linux Enterprise Server for IBM Power 12 SP1 system requires the following two maintenance updates, 1) kernel-default-3.12.57-60.35.1.ppc64le.rpm. The system can be updated after the initial install. This update can be downloaded from: https://download.suse.com/Download?buildid=qd0PaT_bWqU~ and 2) kexec-tools 1056 update available at: https://download.suse.com/Download?buildid=8uWJi0YOv-o~.
|
Adapters and Drivers
| | | | | |
Matrox®
MGA G200e |
| Driver Type: Video Driver | Driver Name: mgag200.ko |
| Driver Date: 11-Nov-2015 | Driver Size: 97943 |
| Checksum: a9ff8d5c05122cb81c250915190b6b5d |
|
Cisco
UCS VIC 1340 (NIC) |
| Driver Type: LAN Driver | Driver Name: enic.ko |
| Driver Date: 11-Nov-2015 | Driver Size: 136391 |
| Checksum: 90ba577148441aaca41080a0ad24fd39 |
| Driver Version: 2.1.1.83 |
|
Cisco
UCS VIC 1340 (HBA) |
| Driver Type: HBA Driver | Driver Name: fnic.ko |
| Driver Date: 11-Nov-2015 | Driver Size: 205135 |
| Checksum: 6a473a7275c51f74df57a0a2f88b5cee |
| Driver Version: 1.6.0.17 |
|
LSI Logic
MegaRAID SAS-3 3108 |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 11-Nov-2015 | Driver Size: 193671 |
| Checksum: 231400c0c6871290e279dba7766c2fd7 |
| Driver Version: 06.807.10.00-rc1 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Elo Touch Solutions, Inc.
670 N. McCarthy Boulevard
Milpitas
, CA
95035
|