|
 | UCS B260 M4
Network Server
Hewlett Packard Enterprise | 23 Jan 2017
145347 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 Service Pack 4 for SUSE® SLES 15 |
Other Products:
| SUSE® Linux Enterprise Micro 5.3 |
Virtual Machines (Guests OS):
| 2
SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 |
|
SP:
Service Pack 2 for SUSE SLES 12 |
Arch:
64 |
Mode:
Fully Virtualized |
|
Windows Server 2012 R2 |
|
Arch:
64 |
Mode:
Fully Virtualized |
Product Description
UCS B260 M4; http://www.cisco.com
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 4.0 |
| BIOS/uEFI: | 4.3.1.2d.0.110720161709 |
| CPU: | 2 Intel
Xeon® Processor E7-8891 v4 2.80 GHz |
| RAM: | Host: 128 GB; Max VM: 104 GB, Multiple VMs: 40 GB each |
| Ports and Bus Types: | 2 PCI Express X16 USB Ports |
| Video Adapter: | Matrox®
MGA G200e |
| Host Bus Adapter: | LSI Logic
MegaRAID SAS-3 3008
, Serial SCSI (SAS) Cisco
UCS VIC 1380 (HBA)
, FibreChannel |
| Hard Disk Drive: | Intel
SSDSA2BZ200G3
, Serial ATA (SATA) |
| Storage Area Network (SAN) Device: | EMC
Symmetrix VMAX |
| Test Kit: | System Certification Kit 7.6.0-44.1 |
Config Notes
- Serial/USB/VGA port(s): provided through KVM connector console breakout cable which supplies one RS232 serial port, one VGA port and two USB ports. The system also has one internal USB port. The two integrated BCM5718 dual-port network adapters are sold as a single Lenovo Flex System EN2024 4-port 1Gb Ethernet Adapter.
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration. Hard Disk Configuration: RAID 1.
- SR-IOV/PCI Pass-through: Current system configuration does not support network SR-IOV or network PCI pass-through.
|
Adapters and Drivers
| | | | | |
| Matrox®
MGA G200e |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 25-Oct-2016 | Driver Size: 95983 |
| | Checksum: 47ef1d90155625b73d3d4281ce034251 |
|
| Cisco
UCS VIC 1380 (NIC) |
| | Driver Type: LAN Driver | Driver Name: enic.ko |
| | Driver Date: 25-Oct-2016 | Driver Size: 143335 |
| | Checksum: cc087761ed279a282fda79adae108199 |
| | Driver Version: 2.3.0.20 |
|
| LSI Logic
MegaRAID SAS-3 3008 |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 25-Oct-2016 | Driver Size: 216703 |
| | Checksum: 43d97f95db88b476471065c1667d0589 |
| | Driver Version: 06.810.09.00-rc1 |
|
| Cisco
UCS VIC 1380 (HBA) |
| | Driver Type: HBA Driver | Driver Name: fnic.ko |
| | Driver Date: 25-Oct-2016 | Driver Size: 205047 |
| | Checksum: 4234fc28cd43e84bd20298087243cc92 |
| | Driver Version: 1.6.0.21 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Hewlett Packard Enterprise
1701 E Mossy Oaks Rd
Spring
, TX
77389
|