|
 | BULLION S8
Network Server
Cisco Systems, Inc. | 28 Oct 2016
144964 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 11 |
Product Description
The BULLION S8 has 8 Intel Xeon E7 v4 processors with a memory capacity of 6TB.
Tested Configuration:
| Computer Type: | Super Server |
| Mother Board Revision: | 11074283-006 |
| BIOS/uEFI: | UEFI: 114.33 (03/16/2016) |
| CPU: | 8 Intel
Xeon® Processor E7-8890 v4 2.20 GHz |
| RAM: | 6 TB |
| Ports and Bus Types: | 7 PCI Express X8 3 USB Ports |
| Video Adapter: | Matrox®
MGA G200eW |
| Host Bus Adapter: | LSI Logic
MegaRAID SAS 9361-4i
, Serial SCSI (SAS) 2 Emulex Corporation
LightPulse LPe12002 8Gb/s Fibre Channel PCI Express
, FibreChannel |
| Hard Disk Drive: | 2 Seagate®
ST600MM0006
, Serial SCSI (SAS) |
| Storage Area Network (SAN) Device: | NEC
M310 |
| Test Kit: | System Certification Kit 7.5.0-20.4 |
Config Notes
- The maximum CPU cores or threads when hyper threading is enabled that can be allocated from LPAR is 48.
- The driver "htc-hfcldd" that was used during testing is SUSE SolidDriver Program compliant. The driver was installed from the driver update disk(DUD) "dud-htc-hfcldd-4.12.18.3146.iso" and the driver package "htc-hfcldd-kmp-default-4.12.18.3146_3.12.28_4-1.sles12.x86_64.rpm". To obtain DUD and the driver package, go to https://sso.hds.com and click on "Support Connect", then select "Product Downloads". DUD can be used to install SUSE Linux Enterprise Server(SLES) to the SAN storage, and driver package can be installed after the SLES installation.
- Install: The SLES install was performed using a virtual DVD device.
- This is SAN Boot only system.
|
Adapters and Drivers
| | | | | |
| 2 Intel
Ethernet Server Adapter I350-T2 (Dual Port) |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 11-Nov-2015 | Driver Size: 345735 |
| | Checksum: c6e591217c50d8be57599231598a6801 |
| | Driver Version: 5.2.18-k |
|
| 2 Emulex Corporation
OCe14102-NM (Dual port) |
| | Driver Type: LAN Driver | Driver Name: be2net.ko |
| | Driver Date: 11-Nov-2015 | Driver Size: 199527 |
| | Checksum: 6756afc6bc3be90c3ddf639f1c284f58 |
| | Driver Version: 10.6.0.2 |
|
| Matrox®
MGA G200eW |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 11-Nov-2015 | Driver Size: 97943 |
| | Checksum: a9ff8d5c05122cb81c250915190b6b5d |
|
| LSI Logic
MegaRAID SAS 9361-4i |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 11-Nov-2015 | Driver Size: 193671 |
| | Checksum: 231400c0c6871290e279dba7766c2fd7 |
| | Driver Version: 06.807.10.00-rc1 |
|
| 2 Emulex Corporation
LightPulse LPe12002 8Gb/s Fibre Channel PCI Express |
| | Driver Type: HBA Driver | Driver Name: lpfc.ko |
| | Driver Date: 11-Nov-2015 | Driver Size: 1136335 |
| | Checksum: dcf2b7e6acd24f0680007292ef5ddfae |
| | Driver Version: 0:10.5.0.2 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose
, CA
95134
Voice: (408) 526-4000
Toll Free: (800) 553-NETS or (800) 553-6387
Website: http://www.cisco.com/c/en/us/support/servers-unified-computing/unified-computing-system/products-technical-reference-list.html
|