|
 | ThinkServer RS160
Network Server
IBM | 31 Aug 2016
144890 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for IBM Power™ Service Pack 3 for SUSE® SLES 11 |
Product Description
For more information, please visit www.lenovo.com
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | LV-C232 Rev 1.04 |
| BIOS/uEFI: | UEFI: VB1TS100 (08/25/2016) |
| CPU: | Intel
Xeon® Processor E3-1280 v5 3.70 GHz |
| RAM: | 32 GB |
| Ports and Bus Types: | PCI Express X16 6 USB Ports Serial |
| Video Adapter: | ASPEED
AST2400 |
| Host Bus Adapter: | Lenovo
ThinkServer RAID 520i PCIe Adapter
, Serial SCSI (SAS) Intel
GL82C232 PCH
, Serial ATA (SATA) |
| Hard Disk Drive: | 2 Hitachi GST
Ultrastar C10K1800 HUC101860CSS200
, Serial SCSI (SAS) |
| CD/DVD: | HLDS
DVDRAM GUB0N SATA CD/DVDRW Drive
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 7.6.0-26.2 |
Config Notes
- SUSE update ISO: The SLES-11-SP3-MINI-ISO-power8.iso is SUSE SolidDriver Program compliant. This update must be downloaded and used before SUSE Linux Enterprise Server install. To obtain the driver go to: http://drivers.suse.com/ibm/IBM-POWER/sle11-sp3/install-readme.html and review the installation instructions.
- Headless configuration - no graphics adapter. System configured using IBM remote Hardware Management Console (HMC) for graphics, keyboard and mouse.
- Power management: The System/Processor dynamic CPU frequency scaling functionality in SLES is not supported on POWER8 as this functionality is provided by the POWER8 hardware itself.
- Required configuration: SLES 11 SP3 will run in POWER7 Compatibility mode. 'Compatibility mode' simply means that the POWER8 processor with SMT8 will act as though it were a POWER7 processor with SMT4.
- Kdump: the crash kernel reserved memory parameters were changed based on the content in the following knowledge-base article: http://www.novell.com/support/kb/doc.php?id=3374462.
- Install: The SUSE® Linux Enterprise Server install was performed using a network install method.
- Required configuration: SLES 12 SP5 will run in POWER9 Compatibility mode. 'Compatibility mode' simply means that the POWER10 processor with SMT8 will act as though it were a POWER9 processor with SMT8.
|
Adapters and Drivers
| | | | | |
| ASPEED
AST2400 |
| | Driver Type: Video Driver | Driver Name: swrast_dri.so |
| | Driver Date: 12-May-2015 | Driver Size: 14588208 |
| | Checksum: e32ce0677419b22ed04c0a096fd98546 |
|
| | Driver Type: Video Driver | Driver Name: ast_drv.so |
| | Driver Date: 17-Jun-2015 | Driver Size: 134960 |
| | Checksum: 01ba3e8b5ba7aff90b4e5d72d1a05efe |
| | Driver Version: 1.0.1 |
|
| Intel
Ethernet Controller I210-AT |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 24-Jun-2015 | Driver Size: 334639 |
| | Checksum: 9d13a78672ff61d57ef1b462ada1ae55 |
| | Driver Version: 5.2.15-k |
|
| Lenovo
ThinkServer RAID 520i PCIe Adapter |
| Intel
GL82C232 PCH |
| | Driver Type: HBA Driver | Driver Name: ahci.ko |
| | Driver Date: 24-Jun-2015 | Driver Size: 58775 |
| | Checksum: 7a0c250f60b9ac6b9684c7be9f36b03e |
| | Driver Version: 3.0 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|