 | UCS-EN120S-M2/K9
Network Server IBM | 06 Jun 2016
144649 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with KVM Service Pack 3 for SUSE® SLES 11 |
Product Description
Cisco E-Series blade module
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | M2 |
| BIOS/uEFI: | BIOS: UCSES.1.5.0.5.020320161524 (02/03/2016) |
| CPU: | Intel Pentium® Processor B295C 2.00 GHz |
| RAM: | 8 GB |
| Ports and Bus Types: | USB Ports |
| Video Adapter: | Matrox® MGA G200e |
| Host Bus Adapter: | LSI Logic MegaRAID SAS 2008 , Serial SCSI (SAS) |
| Hard Disk Drive: | Seagate® ST9500620NS , Serial ATA (SATA) |
| Test Kit: | System Certification Kit 7.5.0-20.4 |
Config Notes
|
Referenced Bulletins
141786
Adapters and Drivers
| Matrox® MGA G200e | |||||||||
| Driver Type: Video Driver | Driver Name: mga_drv.so | ||||||||
| Driver Date: 30-Mar-2013 | Driver Size: 190720 | ||||||||
| Checksum: cbbe7ba695cb37835f3c7d4e79ec43c5 | |||||||||
| Driver Version: 1.4.11 | |||||||||
|
|
|||||||||
| LSI Logic MegaRAID SAS 2008 | |||||||||
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko | ||||||||
| Driver Date: 14-Jun-2013 | Driver Size: 128775 | ||||||||
| Checksum: 36c2f0e7dab4f4c97ea2e019d1fb44da | |||||||||
| Driver Version: 06.506.00.00-rc1 | |||||||||
|
|
|||||||||
| Broadcom® BCM5719 X4 PCI Express® Quad-Port Gigabit Ethernet Controller | |||||||||
| Driver Type: LAN Driver | Driver Name: tg3.ko | ||||||||
| Driver Date: 14-Jun-2013 | Driver Size: 242863 | ||||||||
| Checksum: f89cba187ed6394b55c6f3545b981f06 | |||||||||
| Driver Version: 3.129 | |||||||||
|
|
|||||||||
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com