|
 | UCS B200 M4
Network Server
Unisys Corporation | 03 Apr 2016
144342 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with XEN Service Pack 2 for SUSE® SLES 11 |
Product Description
UCS B200 M4; http://www.cisco.com
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 4.0 |
| BIOS/uEFI: | BIOS: B200M4.3.1.2.0.021720161451 |
| CPU: | 2 Intel
Xeon® Processor E5-2699 v4 2.20 GHz |
| RAM: | 262136 MB |
| Ports and Bus Types: | 2 PCI Express X16 USB Ports |
| Video Adapter: | Matrox®
MGA G200e |
| Host Bus Adapter: | LSI Logic
MegaRAID SAS-3 3108
, Serial SCSI (SAS) Cisco
UCS VIC 1380 (HBA)
, FibreChannel |
| Hard Disk Drive: | Toshiba
AL13SEB300
, Serial SCSI (SAS) |
| Storage Area Network (SAN) Device: | EMC
Symmetrix VMAX |
| Test Kit: | System Certification Kit 7.5.0-20.4 |
Config Notes
- 1. System was configured as 1-node scalable partition.
- 2. VM Driver Pack: All FV guests were tested with PV drivers installed. The SLES 11 SP2 and SLES 10 SP4 drivers are included with the OS. The Windows 2008 drivers are available from http://download.novell.com (VMDP-WIN-2.0.exe).
- 3. Xen: hypervisor was booted with following additional parameters: 'vga=mode-0x317 dom0_mem=6G dom0_max_vcpus=4'
|
Referenced Bulletins
137394
Adapters and Drivers
| | | | | |
| Matrox®
MGA G200e |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 11-Nov-2015 | Driver Size: 97943 |
| | Checksum: a9ff8d5c05122cb81c250915190b6b5d |
|
| Cisco
UCS VIC 1380 (NIC) |
| | Driver Type: LAN Driver | Driver Name: enic.ko |
| | Driver Date: 11-Nov-2015 | Driver Size: 136391 |
| | Checksum: 90ba577148441aaca41080a0ad24fd39 |
| | Driver Version: 2.1.1.83 |
|
| LSI Logic
MegaRAID SAS-3 3108 |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 11-Nov-2015 | Driver Size: 193671 |
| | Checksum: 231400c0c6871290e279dba7766c2fd7 |
| | Driver Version: 06.807.10.00-rc1 |
|
| Cisco
UCS VIC 1380 (HBA) |
| | Driver Type: HBA Driver | Driver Name: fnic.ko |
| | Driver Date: 11-Nov-2015 | Driver Size: 205135 |
| | Checksum: 6a473a7275c51f74df57a0a2f88b5cee |
| | Driver Version: 1.6.0.17 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Unisys Corporation
Unisys Way
Blue Bell
, PA
19424
Voice: 408-434-2600
Fax: 408-434-2688
Website: http://www.unisys.com
|