|
 | UCS-E180D-M2/K9
Network Server
Kyocera Mita Corporation | 08 Oct 2015
143636 |
SUSE YES Certified for the following products:
Operating Systems:
|
SUSE® LINUX Enterprise Server 10 for x86
Service Pack 2 for SUSE® SLES 10 |
Product Description
UCS E series blade module
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | M1 |
| BIOS/uEFI: | BIOS: UCSED.2.5.0.1.031920141205 (03/19/2014) |
| CPU: | Intel
Xeon® Processor E5-2418L v2 2.00 GHz |
| RAM: | 48 GB |
| Ports and Bus Types: | 2 USB Ports Serial |
| Video Adapter: | Matrox®
MGA G200e |
| Host Bus Adapter: | LSI Logic
MegaRAID SAS 9240-4i
, Serial SCSI (SAS) |
| Hard Disk Drive: | LSI Logic
MRSASRoMB-4i
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 7.2.0-5.10 |
Config Notes
- Install: OS install was performed via network using the SUSE SolidDriver-compliant bootable driver kit at http://drivers.suse.com/hp/HP-Z440-Z640-Z840/sle-11-sp3-x86_64/1.0/install-readme.html. LAN and storage drivers are provided by the kit.
- Graphics: Video driver used in testing was downloaded from http://www.hp.com/support/workstations. Video driver is not SolidDriver-compliant and requires installation of kernel source and development tools.
- Kdump: the crash kernel reserved memory parameter was changed to 256 (crashkernel=512M-:256M).
|
Referenced Bulletins
142781
Adapters and Drivers
| | | | | |
| Matrox®
MGA G200e |
| | Driver Type: Video Driver | Driver Name: mga_drv.so |
| | Driver Date: 30-Mar-2013 | Driver Size: 190720 |
| | Checksum: cbbe7ba695cb37835f3c7d4e79ec43c5 |
| | Driver Version: 1.4.11 |
|
| Broadcom®
BCM5719 X4 PCI Express® Quad-Port Gigabit Ethernet Controller |
| | Driver Type: LAN Driver | Driver Name: tg3.ko |
| | Driver Date: 14-Jun-2013 | Driver Size: 242863 |
| | Checksum: f89cba187ed6394b55c6f3545b981f06 |
| | Driver Version: 3.129 |
|
| LSI Logic
MegaRAID SAS 9240-4i |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 14-Jun-2013 | Driver Size: 128775 |
| | Checksum: 36c2f0e7dab4f4c97ea2e019d1fb44da |
| | Driver Version: 06.506.00.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Kyocera Mita Corporation
2-28, 1-Chome, Tamatsukuri, Chuo-ku
Osaka
540-8585
JAPAN
Voice: +81-6-6764-3555
Fax: +81-6-6764-3980
Website: www.kyoceramita.com
|