|
 | PowerEdge FC830
Network Server
Inspur Corporation | 28 Jul 2015
143517 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
Product Description
Please visit www.dell.com for more information.
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | A00 |
BIOS/uEFI: | BIOS: 1.1.5 (06/10/2015) |
CPU: | 4 Intel
Xeon® Processor E5-4669 v3 2.10 GHz |
RAM: | 3072 GB |
Ports and Bus Types: | 3 USB Ports 12 PCI Express X8 |
Video Adapter: | Matrox®
MGA G200eR |
Host Bus Adapter: | Dell
PowerEdge RAID Controller H730P Mini
, Serial SCSI (SAS) |
Hard Disk Drive: | Lite-On®
EBE-100NAS
, Serial ATA (SATA) |
Test Kit: | System Certification Kit 7.3.0-113.3 |
Config Notes
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration.
- Kdump (SLE15): the crash kernel reserved memory parameters were increased from the default to crashkernel=256M,high crashkernel=125M,low using YaST.
|
Adapters and Drivers
| | | | | |
Matrox®
MGA G200eR |
| Driver Type: Video Driver | Driver Name: mgag200.ko |
| Driver Date: 29-Sep-2014 | Driver Size: 97711 |
| Checksum: 0aa1fb610e038786b32b41ad30a9aa41 |
|
2 Broadcom®
BCM57810 10Gb Network Adapter (DualPort) |
| Driver Type: LAN Driver | Driver Name: bnx2x.ko |
| Driver Date: 29-Sep-2014 | Driver Size: 1102527 |
| Checksum: eb98ff4c6a3c6188421a240d2fed33f9 |
| Driver Version: 1.78.19-0 |
|
Dell
PowerEdge RAID Controller H730P Mini |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 29-Sep-2014 | Driver Size: 168407 |
| Checksum: 929c950a0f075f2e946ed38367bf1daf |
| Driver Version: 06.803.01.00-rc1 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Inspur Corporation
Building C. NO.2
Xinxi Road
Shangdi, Haidian District
Beijing
100080
CHINA
|