|
 | UIS R190 G2
Network Server
Fujitsu | 16 Jun 2015
143294 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 with XEN Service Pack 4 for SUSE® SLES 12 |
Product Description
H3C UIS R190 G2 Server
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | RSA2M2C7S VER.C |
| BIOS/uEFI: | UEFI: U15 (12/25/2014) |
| CPU: | 2 Intel
Xeon® Processor E5-2650L v3 1.80 GHz |
| RAM: | 256 GB |
| Ports and Bus Types: | 2 PCI Express X8 4 USB Ports 3 PCI Express X16 |
| Video Adapter: | Matrox®
G200eH |
| Host Bus Adapter: | Intel
X99 Chipset (DHX99 PCH)
, Serial ATA (SATA) |
| Hard Disk Drive: | HP
MM1000GBKAL
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 7.3.0-113.3 |
Config Notes
- Install: The SLES install was performed using a virtual DVD device.
- This is SAN Boot only system.
- The driver "htc-hfcldd" that was used during testing is SUSE SolidDriver Program compliant. The driver was installed from the driver update disk(DUD) "dud-htc-hfcldd-4.12.20.4110.iso" and the driver package "htc-hfcldd-kmp-default-4.12.20.4110_3.12.49_11-1.sles12sp1.x86_64.rpm". To obtain the DUD and the driver package, go to https://sso.hds.com and click on "Support Connect", then select "Product Downloads". The DUD can be used to install SUSE Linux Enterprise Server(SLES) to the SAN storage, and driver package can be installed after the SLES installation.
- The driver "ixgbevf" that was used during testing is SUSE SolidDriver Program compliant. The driver ixgbevf uses Intel(R) 10GbE PCI Express Family of Server Adapters and the driver package name is "intel-ixgbevf-3.2.2-2.1.x86_64.rpm" and "intel-ixgbevf-kmp-default-3.2.2_k3.12.49_11-2.1.x86_64.rpm". This driver package can be downloaded and installed after the SLES12 install. To obtain the DUD and the driver package, go to https://sso.hds.com and click on "Support Connect", then select "Product Downloads".
- The Intel Ethernet Server Adapter X520-2 (Dual Port) is the physical adapter in the system. The Intel 82599EN 10 Gigabit Ethernet Controller is the adapter that is presented to the VM and tested during virtualization testing.
- The maximum CPU cores or threads when hyper threading is enabled that can be allocated to LPAR is 240.
|
Adapters and Drivers
| | | | | |
| Matrox®
G200eH |
| | Driver Type: Video Driver | Driver Name: mga |
| | Driver Date: 29-May-2013 | Driver Size: 190720 |
| | Checksum: cbbe7ba695cb37835f3c7d4e79ec43c5 |
| | Driver Version: 1.4.11 |
|
| HP
Ethernet 1Gb 2-port 361i |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 14-Jun-2013 | Driver Size: 287167 |
| | Checksum: 81bfd34fb256a6fa3cab6fc2f6e9ed3e |
| | Driver Version: 4.1.2-k |
|
| Intel
X99 Chipset (DHX99 PCH) |
| | Driver Type: HBA Driver | Driver Name: ahci.ko |
| | Driver Date: 14-Jun-2013 | Driver Size: 58287 |
| | Checksum: 473c4648eb91631c32be9d18fb2e85ad |
| | Driver Version: 3.0 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
Mies-van-der-Rohe-Strasse 8
München
80807
GERMANY
|