|
 | UCS B260 M4
Network Server
Fujitsu | 21 May 2015
143168 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with XEN Service Pack 1 for SUSE® SLES 11 |
Product Description
UCS B260 M4; http://www.cisco.com/c/en/us/products/servers-unified-computing/ucs-b-series-blade-servers
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 4.0 |
| BIOS/uEFI: | UEFI: EXM4.2.2.5.0.050420151500 |
| CPU: | 2 Intel
Xeon® Processor E7-4850 v3 2.20 GHz |
| RAM: | 128 GB |
| Ports and Bus Types: | USB Ports 2 PCI Express X16 |
| Video Adapter: | Matrox®
MGA G200e |
| Host Bus Adapter: | Cisco
UCS VIC 1380 (HBA)
, FibreChannel LSI Logic
MegaRAID SAS-3 3008
, Serial SCSI (SAS) |
| Hard Disk Drive: | Unigen
PSE4000S3
, USB Seagate®
Savvio® 10K.6 SAS ST300MM0006
, Serial SCSI (SAS) |
| Storage Area Network (SAN) Device: | EMC
Symmetrix VMAX |
| Test Kit: | System Certification Kit 7.3.0-113.1 |
Config Notes
- Install: PXE boot, OS installed via network.
- System was tested using SR-IOV with 3820C network interface assigned to a SLES12SP4 Guest.
|
Adapters and Drivers
| | | | | |
| Matrox®
MGA G200e |
| | Driver Type: Video Driver | Driver Name: mga_drv.so |
| | Driver Date: 17-Jul-2014 | Driver Size: 124048 |
| | Checksum: bed8e78793d30a8ec1b55a623d5647a3 |
| | Driver Version: 1.6.3 |
|
| Cisco
UCS VIC 1380 (NIC) |
| | Driver Type: LAN Driver | Driver Name: enic.ko |
| | Driver Date: 29-Sep-2014 | Driver Size: 120815 |
| | Checksum: b5ea157616e0c049536a59e8b8752fc3 |
| | Driver Version: 2.1.1.50 |
|
| Cisco
UCS VIC 1380 (HBA) |
| | Driver Type: HBA Driver | Driver Name: fnic.ko |
| | Driver Date: 08-Oct-2014 | Driver Size: 203391 |
| | Checksum: e63ba03038814e1560e7be089c294be1 |
| | Driver Version: 1.6.0.11 |
|
| LSI Logic
MegaRAID SAS-3 3008 |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 29-Sep-2014 | Driver Size: 168407 |
| | Checksum: 929c950a0f075f2e946ed38367bf1daf |
| | Driver Version: 06.803.01.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
Heinz-Nixdorf-Ring 1
Paderborn
33106
GERMANY
Voice: +49 (0)5251 525 2537
Website: http://ts.fujitsu.com/products/standard_servers/index.html
|