PRIMERGY® CX2570 M1

PRIMERGY® CX2570 M1
Network Server
Hewlett Packard Enterprise

16 Mar 2015
142951

SUSE YES Certified for the following products:
Operating Systems:

SUSE® Linux Enterprise Server 12 for AMD64 & Intel64

Product Description
The PRIMERGY CX2570 M1 is a compact server node enabling high computing density with two independent servers in 2U. It is ideal for ambitious high performance computing, analytics and visualization solutions. Two server nodes can be embedded in the PRIMERGY CX400 M1 enclosure, only using 2U height in conventional standard datacenter racks. The PRIMERGY CX2570 M1 combines high-end computational and graphics performance with high energy efficiency. Each half-wide server node with Intel® Xeon® processor E5-2600 v3 product CPUs and 16 DDR4 memory DIMMs, features up to two optional NVIDIA® GPGPU or Intel® Xeon Phi™ co-processor cards, enabling a performance boost in supported applications. For more detailed information, please refer to the data sheet at: http://docs.ts.fujitsu.com/dl.aspx?id=ca7443e3-5735-4e6a-8c1a-b85c5f610aef

Tested Configuration:

Computer Type:	Blade Module
Mother Board Revision:	D3343
BIOS/uEFI:	UEFI-Legacy: R1.6.0 (11/11/2014)
CPU:	2 Intel Xeon® Processor E5-2699 v3 2.30 GHz
RAM:	128 GB
Ports and Bus Types:	2 USB Ports 4 PCI Express X16
Video Adapter:	Matrox® MGA G200e
Host Bus Adapter:	Intel C612 Chipset (DH82029 PCH) , Serial ATA (SATA)
Hard Disk Drive:	Intel SSD DC S3700 Series 100GB , Serial ATA (SATA) Intel SSD DC S3700 Series 400GB (SSDSC2BA40) , Serial ATA (SATA)
Test Kit:	System Certification Kit 7.3.0-113.3

Config Notes

Power Management: xhci module (for USB 3.0) is experimental and prevents resume from S3/S4 states. Suggested solution: prevent loading of xhci by adding the line "blacklist xhci" to the /etc/modprobe.d/blacklist file. If the xhci module is needed, it may be force-unloaded when entering S3/S4 by specifying SUSPEND_MODULES="xhci" in a file under /etc/pm/config.d. Any USB 3.0 devices should be unmounted before force-unloading the xhci module.
Graphics: Video driver used in testing is PLDP-compliant and may be installed by adding http://download.nvidia.com/novell/sle11sp1 as an Add-On Product.
Graphics: nvidia-settings used to enable/disable external display. Fn+F4 does not switch displays.

Referenced Bulletins
132812

Adapters and Drivers


Matrox® MGA G200e
	Driver Type: Video Driver	Driver Name: mga
	Driver Date: 29-May-2013	Driver Size: 190720
	Checksum: cbbe7ba695cb37835f3c7d4e79ec43c5
	Driver Version: 1.4.11

Intel Ethernet Controller I350-AM2 (Dual Port)
	Driver Type: LAN Driver	Driver Name: igb.ko
	Driver Date: 14-Jun-2013	Driver Size: 287167
	Checksum: 81bfd34fb256a6fa3cab6fc2f6e9ed3e
	Driver Version: 4.1.2-k

Intel C612 Chipset (DH82029 PCH)
	Driver Type: HBA Driver	Driver Name: ahci.ko
	Driver Date: 14-Jun-2013	Driver Size: 58287
	Checksum: 473c4648eb91631c32be9d18fb2e85ad
	Driver Version: 3.0

The term SUSE YES Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.

https://www.suse.com/product-certification/yes-certified/certification-requirements/

For more information regarding the specific test configuration, please contact:

Hewlett Packard Enterprise
1701 E Mossy Oaks Rd
Spring , TX 77389

542253

PRIMERGY® CX2570 M1 - Yes Bulletin 142951 | SUSE