|
 | BEETLE MII plus
Workstation
Wincor Nixdorf International GmbH | 29 Oct 2014
142201 |
SUSE YES Certified for the following products:
Operating Systems:
|
SUSE® Linux Enterprise Desktop 11 for x86
Service Pack 3 for SUSE® SLED 11 |
Product Description
BEETLE Box for POS with enhanced serial ports and cash drawer connector.
Tested Configuration:
| Computer Type: | POS |
| Mother Board Revision: | I1.0-Q67-STD |
| BIOS/uEFI: | American Megatrends WN STD 01/06 (03/07/2014) |
| CPU: | Intel
Core™ i3-2120 Processor 3.30 GHz |
| RAM: | 8 GB |
| Ports and Bus Types: | 6 Serial 13 USB Ports PCI Express X4 32-bit/33MHz PCI |
| Video Adapter: | Intel
Integrated HD Graphics |
| Desktop Effect Enabled: | Yes |
| Power Management: | Yes |
| Host Bus Adapter: | Intel
BD82Q67 PCH
, Serial ATA (SATA) |
| Hard Disk Drive: | Seagate®
ST980811AS Momentus 5400.3
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 7.2.0-5.10 |
Config Notes
- Install: PXE boot, OS installed via network.
|
Adapters and Drivers
| | | | | |
| Intel
Integrated HD Graphics |
| | Driver Type: Video Driver | Driver Name: intel_drv.so |
| | Driver Date: 30-May-2013 | Driver Size: 327876 |
| | Checksum: 3543475b605f72ea0da6611b2b1fcd70 |
| | Driver Version: 2.21.4 |
|
| Intel
Integrated 82579LM Gigabit Network Connection |
| | Driver Type: LAN Driver | Driver Name: e1000e.ko |
| | Driver Date: 14-Jun-2013 | Driver Size: 278487 |
| | Checksum: e45ab312be4ac19802d48c94bbf0d922 |
| | Driver Version: 2.1.4-k |
|
| Intel
BD82Q67 PCH |
| | Driver Type: HBA Driver | Driver Name: ahci.ko |
| | Driver Date: 14-Jun-2013 | Driver Size: 48215 |
| | Checksum: 5ebd17f69bbf0af9ccfca8f23d7c0762 |
| | Driver Version: 3.0 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Wincor Nixdorf International GmbH
Heinz-Nixdorf-Ring 1
D-33106 Paderborn
GERMANY
|