|
 | PRIMERGY® BX920 S4
Network Server
Hitachi Vantara | 27 Oct 2014
141991 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
Product Description
The Fujitsu Server PRIMERGY BX920 S4 is the new general-purpose dual-socket server blade for the PRIMERGY BX400 and BX900, designed for cost-optimized performance, reliability and holistic server lifecycle management. The BX920 S4 provides breakthrough server blade economics for essential enterprise workloads, virtual client computing scenarios and infrastructure services. It is equipped with CPUs of the latest Intel® Xeon® processor E5-2400v2 product family, delivers up to 768GB of memory and 1600MHz speeds via 12 DIMMs, two hot-plug hard disk drives, multiple RAID options for internal storage, and flexible networking options via the onboard dual-channel 10Gbit/s Ethernet Converged Network Adapter, delivering the performance and versatility needed in an enterprise data center. Fujitsu Server PRIMERGY BX920 S4 supports FUJITSU Software ServerView® Suite integrated Remote Management Controller (iRMC S4) that enables extensive monitoring and management of servers regardless of their system status – even at decentralized locations. iRMC S4 combines long- term expertise and practical experience gained with its successful predecessors with additional unctionalities such as remote control of server- internal HDDs and RAID configurations also in agentless out-of-band operation. For more detailed information please refer to the data sheet at: http://docs.ts.fujitsu.com/dl.aspx?id=a5286fe5-3c5a-4749-86a3-172316ce3cb9
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | D3142 |
| BIOS/uEFI: | UEFI-Legacy: R1.7.0 (03/20/2014) |
| CPU: | 2 Intel
Xeon® Processor E5-2470 v2 2.40 GHz |
| RAM: | 64 GB |
| Ports and Bus Types: | 3 USB Ports 2 PCI Express X8 |
| Video Adapter: | Matrox®
MGA G200e |
| Host Bus Adapter: | Fujitsu
SAS RAID HDD module 8Gbit/s (D2816C)
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 Seagate®
ST9300605SS
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 7.3.0-94.2 |
Config Notes
- Kdump: The crash kernel reserved memory parameters were changed based on the content in the following knowledge-base article for ppc64le: https://www.suse.com/support/kb/doc.php?id=3374462
- Headless configuration - no graphics adapter. System configured using IBM remote Hardware Management Console (HMC) for graphics, keyboard and mouse.
- Install: The SUSE® Linux Enterprise Server install was performed using a network install method.
- CPU: This system is a 2U rack unit configuration with 2 CPU sockets. The Power10 3.9 GHz(MAX) CPUs tested each have 8 cores and SMT 8. Totaling for the system 16 cores and 128 threads.
- Power management: The System/Processor dynamic CPU frequency scaling functionality in SLES is not supported on Power10 (PowerVM) as this functionality is provided by the Power10 hardware itself.
|
Adapters and Drivers
| | | | | |
| Matrox®
MGA G200e |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 19-Aug-2014 | Driver Size: 97007 |
| | Checksum: ff7887102425f2bba08fd653c21d6ebb |
|
| | Driver Type: Video Driver | Driver Name: drm.ko |
| | Driver Date: 20-Aug-2014 | Driver Size: 523047 |
| | Checksum: c2085f6f03b27b773f5c64c8b727eefb |
|
| | Driver Type: Video Driver | Driver Name: mga_drv.so |
| | Driver Date: 17-Jul-2014 | Driver Size: 124048 |
| | Checksum: bed8e78793d30a8ec1b55a623d5647a3 |
| | Driver Version: 1.6.3 |
|
| Emulex Corporation
OneConnect 10Gb Ethernet Adapter OCe11102-N (Dual Port) |
| | Driver Type: LAN Driver | Driver Name: be2net.ko |
| | Driver Date: 20-Aug-2014 | Driver Size: 177119 |
| | Checksum: 385acdc6179a18f2d0651757f9ec1bfd |
| | Driver Version: 10.0.600.0s |
|
| Fujitsu
SAS RAID HDD module 8Gbit/s (D2816C) |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 19-Aug-2014 | Driver Size: 168407 |
| | Checksum: dffa65a5656721e9da8e501ba6606dde |
| | Driver Version: 06.803.01.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Hitachi Vantara
2535 Augustine Drive
Santa Clara
, CA
95054
Voice: 1-408-970-1000
Toll Free: 1-800-227-1930
Fax: 1-408-727-8036
Website: www.hitachivantara.com
|