ETERNUS DX200F

File Name: lpfc.ko

File Version: -1

File Date: 15-Feb-2012

File Size: 989840

Checksum: 587c3f31bb17d5fc2a4f889dd06acaeb

ETERNUS DX200F
Storage Area Network (SAN) Device
Hitachi, Ltd.

08 May 2014
141470

SUSE YES Certified for the following products:
Operating Systems:

SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 Service Pack 4 for SUSE® SLES 12

Product Description
The ETERNUS DX200 All-Flash Array is the ideal choice for application scenarios with demanding data and performance requirements. Unlikepurpose-built expensive all-flash arrays based onspecial architectures, it features the standardhigh-performance architecture of the ETERNUS DXseries. The system delivers impressive IOPS performance with lowest latency even at full load.Thus it thus offers a solution that resolves allperformance issues in critical applications - such asreal-time business analytics or VDI environments - without requiring any complicated tuning. Flexibleand scalable ready-to-run configurations, priced substantially lower than customized flash systems, makes both acquisition and installation affordable, quick and easy. For more information please refer to: http://www.fujitsu.com/global/services/computing/storage/eternus/products/diskstorage/

Tested Configuration:

Host Bus Adapter:	Emulex Corporation MC-FC82E , FibreChannel
Test Kit:	DiskKit 5.01.37 - 2009-10-28

Product File Specifications

HBA Driver:

Config Notes

This is a SAN boot only system.
The Hitachi SAS 3004 iMR ROMB and local HDD (hard disk drives) are not supported on this configuration.
Install: The SLES install was performed using a virtual DVD device.
The driver "hfcldd.ko" used during testing is SUSE SolidDriver Program compliant. The driver was installed from the driver update disk (DUD) "dud-htc-hfcldd-4.12.22.4340.iso" and the driver package "htc-hfcldd-kmp-default-4.12.22.4340_4.12.14_94.41-1.2.sles12sp4.x86_64.rpm". To obtain DUD and the driver package, go to http://www.hitachi.co.jp/products/bladesymphony/download/driver/12347895.html. DUD can be used to install SUSE Linux Enterprise Server(SLES) to the SAN storage, and driver package can be installed after the SLES installation.
The driver "ixgbe.ko" used during testing is SUSE SolidDriver Program compliant. The driver ixgbe used for Intel(R) 10GbE PCI Express Family of Server Adapters is named "ixgbe-kmp-default-5.6.1_k4.12.14_94.41-h1b.x86_64.rpm". This driver package can be downloaded and installed after the SLES12 SP4 install. To obtain the driver go to http://www.hitachi.co.jp/products/bladesymphony/download/driver/12347906.html.

Adapters and Drivers


Emulex Corporation MC-FC82E

The term SUSE YES Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.

https://www.suse.com/product-certification/yes-certified/certification-requirements/

For more information regarding the specific test configuration, please contact:

Hitachi, Ltd.
1 Horiyamashita, Hadano-shi
Kanagawa-ken 259-1392
JAPAN
Voice: +81-463-88-8010
Fax: +81-463-87-7495

603922

ETERNUS DX200F - Yes Bulletin 141470 | SUSE