|
 | Flex System x222 Compute Node (7916 - N2x)
Network Server
NEC Corporation | 05 Dec 2013
140814 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 Service Pack 2 for SUSE® SLES 10 |
Other Products:
Novell® Open Enterprise Server 2 Support Pack 1 |
Product Description
The IBM® Flex System™ x222 Compute Node is a high-density dual-server offering that is designed for virtualization, dense cloud deployments, and hosted clients. The x222 has two independent servers in one mechanical package, which means that the x222 has a double-density design that allows up to 28 servers to be housed in a single 10U Flex System Enterprise Chassis.
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | PASS3 |
BIOS/uEFI: | UEFI-Legacy: CCE125DUS - v1.00 - (07/26/2013) |
CPU: | 2 Intel
Xeon® Processor E5-2470 2.30 GHz |
RAM: | 16 GB |
Ports and Bus Types: | USB Ports |
Video Adapter: | Matrox®
MGA G200eR |
Host Bus Adapter: | Intel
BD82C602J PCH
, Serial ATA (SATA) |
Hard Disk Drive: | IBM
500 GB 7.2K SATA Simple-Swap HDD
, Serial ATA (SATA) |
Test Kit: | System Certification Kit 7.2.0-5.10 |
Config Notes
- The pci:use_crs kernel parameter is required.
- Power Management: System/Processor/OS does not support dynamic frequency scaling.
|
Referenced Bulletins
126336
Adapters and Drivers
| | | | | |
Matrox®
MGA G200eR |
| Driver Type: Video Driver | Driver Name: mga_drv.so |
| Driver Date: 13-May-2013 | Driver Size: 204964 |
| Checksum: 12efb07097320f259e3570652cf129da |
| Driver Version: 1.4.11 |
|
IBM
Embedded Dual-Port 10GB Virtual Fabric Ethernet LOM |
| Driver Type: LAN Driver | Driver Name: be2net.ko |
| Driver Date: 14-Jun-2013 | Driver Size: 114255 |
| Checksum: de690b3de046a32976dcfef305d970e0 |
| Driver Version: 4.4.161.0s |
|
Intel
BD82C602J PCH |
| Driver Type: HBA Driver | Driver Name: ahci.ko |
| Driver Date: 14-Jun-2013 | Driver Size: 48215 |
| Checksum: 5ebd17f69bbf0af9ccfca8f23d7c0762 |
| Driver Version: 3.0 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
NEC Corporation
1-10 Nissin-cho, Fuchu-shi
Tokyo
183-8501
JAPAN
Voice: (+81) 42 333 1324
Fax: (+81) 42 333 1821
|