|
 | ProLiant ML350e Gen8 v2 2.30 GHz Eight Core
Network Server
Supermicro Computer | 12 Nov 2013
140739 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 Service Pack 4 for SUSE® SLES 15 |
Other Products:
| SUSE® Linux Enterprise Micro 5.3 | SUSE® Linux Enterprise Micro 5.4 |
Product Description
For more information, please visit www.hp.com
Tested Configuration:
| Computer Type: | Tower |
| Mother Board Revision: | Gen8 |
| BIOS/uEFI: | J02_0704 (07/04/2013) |
| CPU: | 2 Intel
Xeon® Processor E5-2470 2.30 GHz |
| RAM: | 192 GB |
| Ports and Bus Types: | 6 USB Ports Serial 2 PCI Express X8 3 PCI Express X16 PCI Express X4 |
| Video Adapter: | Matrox®
G200eH |
| Host Bus Adapter: | Intel
BD82C602 PCH
, Serial ATA (SATA) |
| Hard Disk Drive: | HP
MB2000EAZNL
, Serial ATA (SATA) |
| CD/DVD: | HP
DVD-RAM GHA3N
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 7.2.0-5.10 |
Config Notes
- Headless configuration - no graphics adapter. System configured by using the built-in NANO-BMC for serial redirection of video and keyboard.
- Install: OS installed via USB CD/DVD drive.
- Install: When booting to install the OS the boot (setprams 'Install SL Micro') parameters at the “GNU GRUB” screen must be modified by using these instructions. At the operating system boot screen press the "e" key. Use the "Down Arrow" key to move the cursor to the line that starts with "Linux". Use the "Right Arrow" key to move the cursor to the "console=ttys0" string. Replace the "console=ttys0" parameter with "console=ttys1 console=ttyS4,115200n8 systemd.wants=serial-getty@ttyS4". Then proceed with the installation by pressing “Ctrl-x or F10”. To make this change persistent after installation add the same parameters/commands in the line starting with “GRUB_CMDLINE_LINUX_DEFAULT=” in the /etc/default/grub file. Then run the following command: "transactional-update grub.cfg"
|
Adapters and Drivers
| | | | | |
| Matrox®
G200eH |
| | Driver Type: Video Driver | Driver Name: mga_drv.so |
| | Driver Date: 04-Feb-2012 | Driver Size: 190688 |
| | Checksum: 9ec99a5b6850be782df01c0b7663d67f |
|
| 2 HP
Ethernet 1Gb 2-port 361i |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 15-Feb-2012 | Driver Size: 246368 |
| | Checksum: fcb34e6c5610ff2a00a5460f065817e6 |
|
| Intel
BD82C602 PCH |
| | Driver Type: HBA Driver | Driver Name: ahci.ko |
| | Driver Date: 15-Feb-2012 | Driver Size: 52464 |
| | Checksum: 8e7f557e5cfe98455deef90148417821 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Supermicro Computer
980 Rock Ave.
San Jose
, CA
95131
Website: https://www.supermicro.com/
|