 | PRIMERGY® CX250 S2
Network Server IBM | 11 Nov 2013
140737 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server for IBM Power 12 |
Virtual Machines (Guests OS):
| SUSE® Linux Enterprise Server 11 for x86 | |||
| SP: Service Pack 3 for SLES 11 | Arch: 32pae | Mode: Paravirtualized | |
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 | |||
| SP: Service Pack 3 for SLES 11 | Arch: 64 | Mode: Fully Virtualized | |
| Windows Server 2008 | |||
| SP: Service Pack 2 for Windows Server 2008 | Arch: 32 | Mode: Fully Virtualized | |
Product Description
Up to four Fujitsu Server PRIMERGY CX250 S2 server nodes, each in a half-wide 1U form-factor, can be packaged into the PRIMERGY CX400 S2 Multi-Node server system, thus providing an aggregated scale-out performance of a total of 8 CPUs of the latest Intel® Xeon® processor E5-2600 v2 product family, 64 DIMMs and up to 24 storage drives in a condensed 2 U rack enclosure. The CX250 S2 dual socket server node combines high performance and attractive purchase costs with high energy efficiency while coming without any local fans or power supply units. Up to 16 high bandwidth memory modules provide a memory capacity of 1,024 GB per server node. With PCIe Gen3 IO slots and RAID enabled access to local storage drives, the CX250 S2 server easily plays its role as the standard two processor node for PRIMERGY CX400 S2, providing a great versatility to match even ambitious server load profiles for scale-out Cloud and HPC server farms and as slave node in Hadoop envirnoments for Big Data processing. For more detailed information, please refer to the data sheet at: http://docs.ts.fujitsu.com/dl.aspx?id=5344296a-14c7-477d-837f-17fb2e035a89
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | D3196 |
| BIOS/uEFI: | UEFI-Legacy Boot: Rev.4A27.3196 (09/27/2013) |
| CPU: | 2 Intel Xeon® Processor E5-2697 v2 2.70 GHz |
| RAM: | 256 GB |
| Ports and Bus Types: | Serial 2 USB Ports 2 PCI Express X16 |
| Video Adapter: | ASPEED AST2300 |
| Host Bus Adapter: | LSI Logic MegaRAID Software RAID , Serial ATA (SATA) |
| Hard Disk Drive: | 3 Seagate® ST91000640NS , Serial ATA (SATA) |
| Test Kit: | System Certification Kit 7.2.0-5.10 |
Config Notes
|
Referenced Bulletins
146645
Adapters and Drivers
| ASPEED AST2300 | |||||||||
| Driver Type: Video Driver | Driver Name: ast_drv.so | ||||||||
| Driver Date: 30-May-2013 | Driver Size: 96096 | ||||||||
| Checksum: 41733d0f905440b2b69759ee4d3dda05 | |||||||||
| Driver Version: 0.92.2 | |||||||||
|
|
|||||||||
| Intel Ethernet Controller I350-AM2 (Dual Port) | |||||||||
| Driver Type: LAN Driver | Driver Name: igb.ko | ||||||||
| Driver Date: 14-Jun-2013 | Driver Size: 284151 | ||||||||
| Checksum: 7ece6d08a3e85e6b5ecb426396ea3b62 | |||||||||
| Driver Version: 4.1.2-k | |||||||||
|
|
|||||||||
| LSI Logic MegaRAID Software RAID | |||||||||
| Driver Type: HBA Driver | Driver Name: megasr.ko | ||||||||
| Driver Date: 18-Jun-2013 | Driver Size: 11127764 | ||||||||
| Checksum: f6475ed22dee5771f5dedd56289815d2 | |||||||||
| Driver Version: 15.02.2013.0425 | |||||||||
|
|
|||||||||
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com