|
 | Integrity rx8640 PCI-E
Network Server
IBM | 20 Aug 2013
140023 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with XEN Service Pack 1 for SUSE® SLES 11 |
Product Description
For more information, please visit http://www.hp.com
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | A4 |
| BIOS/uEFI: | UEFI: 9.066 (7/1/2009) |
| CPU: | 5 Intel
Dual-Core Itanium® Processor 9150N 1.60 GHz |
| RAM: | 32 GB |
| Ports and Bus Types: | 8 64-bit/133MHz PCI-X 8 PCI Express X8 |
| Host Bus Adapter: | LSI Logic
Company 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI
, SCSI |
| Hard Disk Drive: | Seagate®
ST373455LC Ultra320 SCSI
, SCSI |
| CD/DVD: | HLDS
GCC-4481B
, SCSI |
| Test Kit: | System Certification Kit 7.2.0-5.10 |
Config Notes
- Install: PXE Boot, OS Installed via Network.
- Maintenance update: Current maintenance updates were installed on the host for this test configuration.
- The following Xen hypervisor boot parameters were used for this test configuration: dom0_mem=5G dom0_max_vcpus=10
- System was configured as a single node with an attached MAX5 memory drawer.
|
Adapters and Drivers
| | | | | |
| Broadcom®
Integrated BCM 5703 Gigabit Ethernet Controller |
| | Driver Type: LAN Driver | Driver Name: tg3.ko |
| | Driver Date: 31-May-2013 | Driver Size: 456959 |
| | Checksum: 2c3d1cba4a2acbbcf0b44834db87539c |
| | Driver Version: 3.129 |
|
| LSI Logic
Company 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI |
| | Driver Type: HBA Driver | Driver Name: mptspi.ko |
| | Driver Date: 31-May-2013 | Driver Size: 58471 |
| | Checksum: 0fd7d2694f64192ff272adbfda179ef4 |
| | Driver Version: 4.28.00.01suse |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|