|
 | UCS B200 M2
Network Server
Inspur Corporation | 23 Jul 2013
139813 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 Service Pack 2 for SUSE® SLES 12 |
Product Description
UCS B200M2, http://www.cisco.com/en/US/products
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | M2 |
| BIOS/uEFI: | S5500.2.1.1b.0.020620132148 |
| CPU: | 2 Intel
Xeon® Processor E5620 2.40 GHz |
| RAM: | 32 GB |
| Ports and Bus Types: | 2 PCI Express X8 |
| Video Adapter: | Matrox®
MGA G200 |
| Host Bus Adapter: | Cisco
UCS VIC 1280 (HBA)
, FibreChannel LSI Logic
MegaRAID® SAS 9240-8i
, Serial SCSI (SAS) |
| Hard Disk Drive: | Toshiba
MBF2300RC
, Serial SCSI (SAS) |
| Storage Area Network (SAN) Device: | EMC
Symmetrix VMAX |
| Test Kit: | System Certification Kit 7.2.0-5.10 |
Config Notes
- Install: The SLES install was performed using a virtual DVD device.
|
Adapters and Drivers
| | | | | |
| Matrox®
MGA G200 |
| | Driver Type: Video Driver | Driver Name: mga_drv.so |
| | Driver Date: 04-Feb-2012 | Driver Size: 190688 |
| | Checksum: 9ec99a5b6850be782df01c0b7663d67f |
|
| Cisco
UCS VIC 1280 (NIC) |
| | Driver Type: LAN Driver | Driver Name: enic.ko |
| | Driver Date: 15-Feb-2012 | Driver Size: 97360 |
| | Checksum: 583ba131ebf1e1b843fc124e26434aad |
|
| Cisco
UCS VIC 1280 (HBA) |
| | Driver Type: HBA Driver | Driver Name: fnic.ko |
| | Driver Date: 15-Feb-2012 | Driver Size: 122136 |
| | Checksum: 8fdf42884aa8ed1ddb98058d5f3c7510 |
|
| LSI Logic
MegaRAID® SAS 9240-8i |
| | Driver Type: HBA Driver | Driver Name: mptsas.ko |
| | Driver Date: 15-Feb-2012 | Driver Size: 110008 |
| | Checksum: f58c58745e32babd011e4c9cd94f691b |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Inspur Corporation
Building C. NO.2
Xinxi Road
Shangdi, Haidian District
Beijing
100080
CHINA
|