|
 | Flex System x220 Compute Node (7906 - D2x)
Network Server
Cisco Systems, Inc. | 01 Jul 2013
139333 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 Service Pack 2 for SUSE® SLES 12 |
Other Products:
| SUSE® OpenStack Cloud 7 - Admin & Control Node |
Virtual Machines (Guests OS):
|
SUSE® Linux Enterprise Server 11 for x86 |
|
SP:
Service Pack 3 for SLES 11 |
Arch:
32pae |
Mode:
Fully Virtualized |
|
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 |
|
SP:
Service Pack 3 for SLES 11 |
Arch:
64 |
Mode:
Fully Virtualized |
|
Windows Server 2012 |
|
Arch:
64 |
Mode:
Fully Virtualized |
Product Description
The IBM Flex System x220 Compute Node is the next generation cost-optimized compute node designed for less demanding workloads and low-density virtualization. The x220 is efficient and equipped with flexible configuration options and advanced management to run a broad range of workloads.
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 1 |
| BIOS/uEFI: | UEFI: KSE120BUS - v1.20 (11/22/2012) |
| CPU: | 2 Intel
Xeon® Processor E5-2420 1.90 GHz |
| RAM: | 24 GB |
| Ports and Bus Types: | 2 USB Ports Serial 2 PCI Express X16 |
| Video Adapter: | Matrox®
MGA G200eR |
| Host Bus Adapter: | IBM
ServeRAID H1135 SAS/SATA Controller
, Serial ATA (SATA) |
| Hard Disk Drive: | Seagate®
ST9500620NS 500GB SATA
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 7.2.0-5.9 |
Config Notes
- Kdump: the crash kernel reserved memory parameter in the elilo.conf file was changed from 128 to 256 (crashkernel:512M-:256M) for kdump to function correctly.
- Xen Hypervisor: the hypervisor was booted with following additional parameters: dom0_mem=10G dom0_max_vcpus=10.
- Tested as a 2-node scalable partition with 8 Compute Books. Hard disk configuration: RAID 0 and RAID 1.
- Maintenance update: SLES 11 SP3 Xen maintenance update 8973 and kernel update 9329 (x86-64) are required and were installed during certification testing.
- VM Driver Pack: All guests were tested with PV drivers installed. The SLES 11 SP3 drivers are included with the OS. The Windows 2012 R2 drivers are available from http://download.novell.com (VMDP-WIN-2.1.exe).
- SUSE Driver Kit: The ibm_x6-sle11sp3-x86_64 driver kit is SUSE SolidDriver Program compliant. The driver kit was installed during the SLES install process as an initial bootable iso image. This driver must be downloaded and installed before the SLES install. To obtain the driver go to: http://drivers.suse.com/ibm/IBM-X6/sle11-sp3/install-readme.html.
- Install: System installed using an external USB DVD drive; the OS was installed from DVD using the UEFI boot loader and elilo system configuration.
- PCI Network Pass-Through: System was tested using PCI pass-through where two of the host network adapters were given, one each, to the FV SLES 11 SP3 i586 and FV SLES 11 SP3 x86-64 guests. Two of the Intel® I350-T4 ML2 Quad Port GbE Adapters was used during this testing.
|
Adapters and Drivers
| | | | | |
| Matrox®
MGA G200eR |
| | Driver Type: Video Driver | Driver Name: mga_drv.so |
| | Driver Date: 30-Mar-2013 | Driver Size: 190720 |
| | Checksum: cbbe7ba695cb37835f3c7d4e79ec43c5 |
| | Driver Version: 1.4.11 |
|
| Broadcom®
Integrated BCM5718 Dual-Port Gigabit Ethernet Controller |
| | Driver Type: LAN Driver | Driver Name: tg3.ko |
| | Driver Date: 13-May-2013 | Driver Size: 242863 |
| | Checksum: 55b78798be897ab46e90dd02f5f03ff3 |
| | Driver Version: 3.129 |
|
| IBM
ServeRAID H1135 SAS/SATA Controller |
| | Driver Type: HBA Driver | Driver Name: mpt2sas.ko |
| | Driver Date: 13-May-2013 | Driver Size: 271655 |
| | Checksum: fe746ed9c6d84db2b008b77f6f711d80 |
| | Driver Version: 14.100.00.00 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose
, CA
95134
Voice: (408) 526-4000
Toll Free: (800) 553-NETS or (800) 553-6387
Website: http://www.cisco.com/c/en/us/support/servers-unified-computing/unified-computing-system/products-technical-reference-list.html
|