|
| BEETLE /i8A-G41 BL
Workstation
Wincor Nixdorf International GmbH | 18 Jun 2013
139097 |
SUSE "YES" Enterprise Certified with the following products:
Operating Systems:
SUSE® Linux Enterprise Desktop 11 for x86
Service Pack 2 for SUSE® SLED 11 |
Product Description
BEETLE Box for POS with enhanced serial ports and cash drawer connector
Tested Configuration:
Computer Type: | POS |
Mother Board Revision: | i8A G41 Revision D167 |
BIOS/uEFI: | Phoenix 2.03 2K 104229 |
CPU: | Intel
Core™2 Duo Desktop Processor E7400 2.80 GHz |
RAM: | 4 GB |
Ports and Bus Types: | PCI Express X1 4 USB Ports 7 Serial |
Video Adapter: | Intel
82G41 Graphics |
Desktop Effect Enabled: | Yes |
Power Management: | Yes |
Host Bus Adapter: | Intel
Integrated 82801GB ICH7
, Serial ATA (SATA) |
Hard Disk Drive: | Seagate®
ST9160314AS
, Serial ATA (SATA) |
Test Kit: | System Certification Kit 7.1.0-42.5 |
Config Notes
- OS installed via USB DVD device
- Power management: Sleep / Suspend to RAM / ACPI S3 is NOT supported on this system.
- Power management: System/Processor does not support fan thermal scaling.
|
Adapters and Drivers
| | | | | |
Intel
82G41 Graphics |
| Driver Type: Video Driver | Driver Name: intel_drv.so |
| Driver Date: 04-Feb-2012 | Driver Size: 328324 |
| Checksum: 49135b9de08a3ba6acca9e8a61da8fa3 |
|
REALTEK
RTL8111B Integrated Gigabit Ethernet Controller |
| Driver Type: LAN Driver | Driver Name: r8169.ko |
| Driver Date: 15-Feb-2012 | Driver Size: 62296 |
| Checksum: 5225dd35270e3b17d48a568a48100265 |
|
Intel
Integrated 82801GB ICH7 |
| Driver Type: HBA Driver | Driver Name: ata_piix.ko |
| Driver Date: 16-Feb-2012 | Driver Size: 37352 |
| Checksum: 3987de7b0d2772eeb9777d87cf553475 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Wincor Nixdorf International GmbH
Heinz-Nixdorf-Ring 1
D-33106 Paderborn
GERMANY
|