 | BEETLE /i8A-G41 BL
Workstation Wincor Nixdorf International GmbH | 15 May 2013
139072 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Desktop 11 for x86 Service Pack 2 for SUSE® SLED 11 |
Product Description
BEETLE Box for POS with enhanced serial ports and cash drawer connector
Tested Configuration:
| Computer Type: | POS |
| Mother Board Revision: | i8A G41 Revision D167 |
| BIOS/uEFI: | Phoenix 2.03 2K 104229 |
| CPU: | Intel Core™2 Duo Desktop Processor E7400 2.80 GHz |
| RAM: | 4 GB |
| Ports and Bus Types: | PCI Express X1 4 USB Ports 7 Serial |
| Video Adapter: | Intel 82G41 Graphics |
| Desktop Effect Enabled: | No |
| Power Management: | No |
| Host Bus Adapter: | Intel Integrated 82801GB ICH7 , Serial ATA (SATA) |
| Hard Disk Drive: | Seagate® ST9160314AS , Serial ATA (SATA) |
| Test Kit: | System Certification Kit 7.1.0-42.5 |
Config Notes
|
Referenced Bulletins
126638
Adapters and Drivers
| Intel 82G41 Graphics | |||||||||
| Driver Type: Video Driver | Driver Name: intel_drv.so | ||||||||
| Driver Date: 04-Feb-2012 | Driver Size: 328324 | ||||||||
| Checksum: 49135b9de08a3ba6acca9e8a61da8fa3 | |||||||||
|
|
|||||||||
| REALTEK RTL8111/8168B PCI Express Gigabit Ethernet Controller | |||||||||
| Driver Type: LAN Driver | Driver Name: r8169.ko | ||||||||
| Driver Date: 15-Feb-2012 | Driver Size: 62296 | ||||||||
| Checksum: 5225dd35270e3b17d48a568a48100265 | |||||||||
|
|
|||||||||
| Intel Integrated 82801GB ICH7 | |||||||||
| Driver Type: HBA Driver | Driver Name: ata_piix.ko | ||||||||
| Driver Date: 16-Feb-2012 | Driver Size: 37352 | ||||||||
| Checksum: 3987de7b0d2772eeb9777d87cf553475 | |||||||||
|
|
|||||||||
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Wincor Nixdorf International GmbH
Heinz-Nixdorf-Ring 1
D-33106 Paderborn
GERMANY