PRIMERGY® TX140 S1p

PRIMERGY® TX140 S1p
Network Server
IBM

16 Aug 2012
138153

SUSE YES Certified for the following products:
Operating Systems:

SUSE® Linux Enterprise Desktop 11 for x86 Service Pack 1 for SUSE® SLED 11

Other Products:

SUSE® LINUX Enterprise Point of Service (SLEPOS)

Product Description
PRIMERGY TX140 S1p: the expandable SME allrounder. It is ideal for SME or branch customers looking for a classic file, print, mail, or database server, with high scalability, and best availability through optional redundant power supplies. As the company evolves, so too does the TX140 S1p. Storing up to 12 TB of data, the TX140 S1p can easily handle large files. At a later stage, the TX140 S1p can be included in a rack cabinet with dedicated storage systems. From here, customers can fully take advantage of the extensive connectivity options, Intel® Xeon® E3 series performance, and high serviceability via the optional front service LAN port. For more detailed information please refer to the data sheet at: http://docs.ts.fujitsu.com/dl.aspx?id=4ab73c7f-cc90-4734-837d-4df5104e36fd

Tested Configuration:

Computer Type:	Tower
Mother Board Revision:	D3049
BIOS/uEFI:	R1.9.0
CPU:	Intel Xeon® Processor E3-1230V2 3.30 GHz
RAM:	8 GB
Ports and Bus Types:	PCI Express X16 PCI Express X4 PCI Express X1 32-bit/33MHz PCI 10 USB Ports Serial
Video Adapter:	Matrox® MGA G200e
Host Bus Adapter:	LSI Logic Onboard S-ATA RAID , Serial ATA (SATA)
Hard Disk Drive:	2 Seagate® ST9500620NS 500GB SATA , Serial ATA (SATA)
CD/DVD:	Hitachi Data Systems BD-RE BH38N , Serial ATA (SATA)
Test Kit:	System Certification Kit 7.1.0-33.2

Config Notes

Desktop Effects: Graphics driver/adapter does not support desktop effects.
Power Management: Sleep / Suspend to RAM / ACPI S3 is NOT supported on this system.
Power Management: System/Processor does not support throttling.
Power Management: System/Processor does not support dynamic CPU frequency scaling.
Power Management: S4 does not work with the default vesa driver. For it to work, the Intel driver should be used on this system. To change to the Intel driver, execute the following steps: (1) Edit the file /etc/X11/xorg.conf (2) Under section "Device", change the Driver parameter to "intel", then save the file. (3) Reboot the system.

Adapters and Drivers


Matrox® MGA G200e
	Driver Type: Video Driver	Driver Name: mga_drv.so
	Driver Date: 04-Feb-2012	Driver Size: 190688
	Checksum: 9ec99a5b6850be782df01c0b7663d67f

Intel 82574L Gigabit Ethernet
	Driver Type: LAN Driver	Driver Name: e1000e.ko
	Driver Date: 15-Feb-2012	Driver Size: 330640
	Checksum: 79db3b1f819b3306b09365875ded5fed

Intel 82579LM Gigabit Ethernet PHY (single port)
	Driver Type: LAN Driver	Driver Name: e1000e.ko
	Driver Date: 15-Feb-2012	Driver Size: 330640
	Checksum: 79db3b1f819b3306b09365875ded5fed

LSI Logic Onboard S-ATA RAID
	Driver Type: HBA Driver	Driver Name: megasr.ko
	Driver Date: 02-Apr-2012	Driver Size: 10877093
	Checksum: 3446164aeb0aae8bed575649024f9dc9

The term SUSE YES Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.

https://www.suse.com/product-certification/yes-certified/certification-requirements/

For more information regarding the specific test configuration, please contact:

IBM
For support regarding this specific configuration, please visit:
www.ibm.com

541706

PRIMERGY® TX140 S1p - Yes Bulletin 138153 | SUSE