|
 | UCS-E140S-M1/K9
Network Server
IBM | 26 Jun 2012
137794 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with KVM Service Pack 3 for SUSE® SLES 11 |
Product Description
UCS E series Blade Module
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | A0 |
| BIOS/uEFI: | 4.6.5.8 |
| CPU: | Intel
Xeon® Processor E3-1105C 1.0 GHz |
| RAM: | 16 GB |
| Ports and Bus Types: | 2 USB Ports Serial |
| Video Adapter: | Matrox®
MGA G200e |
| Host Bus Adapter: | LSI Logic
SAS2004 PCI-Express Fusion-MPT
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 Seagate®
SAVVIO 10K.5
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 7.1.0-33.2 |
Config Notes
- Hard Disk Configuration: RAID 0.
- Install: PXE Boot, OS Installed via network.
- The total number of usable expansion slots is dependent on the model/power-supply configuration used.
|
Referenced Bulletins
139766
Adapters and Drivers
| | | | | |
| 3 Broadcom®
BCM5719 X4 PCI Express® Quad-Port Gigabit Ethernet Controller |
| | Driver Type: LAN Driver | Driver Name: tg3.ko |
| | Driver Date: 15-Feb-2012 | Driver Size: 223384 |
| | Checksum: 76a70bfcec58d2d10d9514f1d2ec4a86 |
|
| LSI Logic
SAS2004 PCI-Express Fusion-MPT |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 15-Feb-2012 | Driver Size: 127144 |
| | Checksum: 9064ff5d397905a2741116667bdcf91a |
|
| Matrox®
MGA G200e |
| | Driver Type: Video Driver | Driver Name: mga_drv.so |
| | Driver Date: 04-Feb-2012 | Driver Size: 190688 |
| | Checksum: 9ec99a5b6850be782df01c0b7663d67f |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|